Aruba 103H

  • The AP-103H installs in minutes and easily mounts to an electrical or data wall box. It uses the existing structured cabling system to provide secure wired and Wi-Fi network access in dormitories, classrooms, hotels, medical clinics and multitenant environments.

    The compact and cost-effective AP-103H delivers wireless data rates up to 300 Mbps per radio employing 802.11n technology with two spatial MIMO streams. This 2x2:2 AP features dedicated 2.4-GHz and 5-GHz radios and integrated omni-directional antennas.

    For wired connectivity, the AP-103H provides two secure downlink switch ports, a passive pass-through RJ-45 port, and a 10/100/1000BASE-T uplink port. It can be powered using an 802.3af power-over-Ethernet (PoE) source on the uplink network port or a 12-volt DC power supply.

      • Best-in-class RF management
        • All Aruba APs include Adaptive Radio Management technology, which is essential to creating the most reliable, high-performance WLANs. ARM manages the 2.4-GHz and 5-GHz radio bands to optimize Wi-Fi client performance and ensures that APs stay clear of RF interference.
      • Spectrum analysis
        • Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4 GHz and 5 GHz radio bands to identify sources of RF interference.
      • Security
        • SecureJack-capable for secure tunneling of wired Ethernet traffic.
      • Mobility Controller-managed AP
      • Remote AP (RAP) for branch deployments
      • Air monitor (AM) for wireless IDS, rogue detection and containment
      • Spectrum analyzer, dedicated or hybrid
      • Secure enterprise mesh
      • AP type: Indoor, dual radio, 5-GHz and 2.4-GHz 802.11n 2x2:2
      • Software-configurable dual radio supports 5-GHz (Radio 0) and 2.4-GHz (Radio 1)
      • 2×2 MIMO with two spatial streams and up to 300 Mbps wireless data rate
      • Support for up to 32 associated client devices, and up to eight BSSIDs per radio
      • Supported frequency bands (country-specific restrictions apply):
        • 2.4000 GHz to 2.4835 GHz
        • 5.150 to 5.250 GHz
        • 5.250 to 5.350 GHz
        • 5.470 to 5.725 GHz
        • 5.725 to 5.850 GHz
      • Available channels: Dependent on configured regulatory domain
      • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
      • Supported radio technologies:
        • 802.11b: Direct-sequence spread-spectrum (DSSS)
        • 802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM)
      • Supported modulation types:
        • 802.11b: BPSK, QPSK, CCK
        • 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
      • Transmit power: Configurable in increments of 0.5 dBm
      • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
        • 2.4-GHz band: +21 dBm (18 dBm per chain)
        • 5-GHz band: +21 dBm (18 dBm per chain)
      • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
      • Maximum ratio combining (MRC) for improved receiver performance
      • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
      • Short guard interval for 20-MHz and 40-MHz channels
      • Space-time block coding (STBC) for increased range and improved reception
      • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
      • Supported data rates (Mbps):
        • 802.11b: 1, 2, 5.5, 11
        • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
        • 802.11n: 6.5 to 300 (MCS0 to MCS15)
      • 802.11n high-throughput (HT) support: HT 20/40
      • 802.11n packet aggregation: A-MPDU, A-MSDU
      • Max IPsec encrypted wired throughput = 10Mbps
      • Two integrated dual-band omni-directional antennas for 2x2 MIMO with maximum antenna gain of 3.6 dBi in 2.4 GHz and 3.3 dBi in 5 GHz. Antennas are optimized for vertical wall mounted orientation of the AP.
      • E0: 10/100/1000BASE-T Ethernet network interface (RJ-45)
        • Auto-sensing link speed and MDI/MDX
        • 802.3az Energy Efficient Ethernet (EEE)
        • PoE-PD: 48 Vdc (nominal) 802.3af PoE
      • E1-E2: 2x 10/100BASE-T Ethernet network interfaces (RJ-45)
        • Auto-sensing link speed and MDI/MDX
      • PT: Passive RJ-45 pass-through port
      • DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length
      • Visual indicator (single tricolor LED): power/system status
      • Dual-function push-button: Factory reset during device power up and LED on/off control during normal operation
      • Serial console interface (proprietary; optional adapter cable available)
      • Kensington security slot
    • POWER
      • Maximum (worst-case) power consumption: 9.4 watts PoE or 8.3 watts DC
      • Maximum (worst-case) power consumption in idle mode: 3.5 watts PoE or 2.9 watts DC
      • Direct DC source: 12 Vdc nominal, +/- 5%
      • Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af compliant source
      • Power sources sold separately
      • When both power sources are available, DC power takes priority
      • Included with AP: Mount plate for single-gang electrical/data wall-box (various worldwide standards)
      • Spare mounting kit: AP-103H-MNT1: Mount plate for single-gang electrical/data wall-box (various worldwide standards)
      • Optional mounting kit: AP-103H-MNT2: Mount plate for dual-gang electrical/data wall-box (various worldwide standards)
      • Dimensions/weight (unit, excluding mount accessories):
        • 86 mm (W) x 30 mm (D) x 140 mm (H), 3.39” (W) x 1.18” (D) x 5.51” (H)
        • 260 g/9.17 oz
      • Dimensions/weight (unit, as mounted):
        • 86 mm (W) x 31 mm (D) x 140 mm (H), 3.39” (W) x 1.22” (D) x 5.51” (H)
        • 305 g/10.76 oz
      • Dimensions/weight (shipping):
        • 143 mm (W) x 49 mm (D) x 168 (H), 5.63” (W) x 1.93” (D) x 6.61” (H)
        • 420 g/14.82 oz
      • AP attaches securely to mount bracket using built-in security features. Removing the unit from the bracket requires a custom tool that ships with the product.
      • Operating:
        • Temperature: 0° C to +40° C (+32° F to +104° F)
        • Humidity: 5% to 93% non-condensing
      • Storage and transportation temperature range:
        • Temperature: -40° C to +70° C (-40° F to +158° F)
      • FCC/Industry of Canada
      • CE Marked
      • R&TTE Directive 1995/5/EC
      • Low Voltage Directive 72/23/EEC
      • EN 300 328
      • EN 301 489
      • EN 301 893
      • UL/IEC/EN 60950
      • EN 60601-1-1 and EN 60601-1-2
      For more country-specific regulatory information and approvals, please see your Aruba representative.
      MTBF: 500,858 hours (57.2 years) at +25° C operating temperature
      • AP-103H: APINH103
      • CB Scheme Safety, cTUVus
      • Wi-Fi Alliance (WFA) certified 802.11a/b/g/n
      Aruba limited lifetime warranty
      • ArubaOS