The Aruba AP-65 is a dual radio (dual-band concurrent 802.11a plus b/g) high performance indoor wireless access point capable of supporting multiple functions including WLAN access, air monitoring/wireless intrusion detection and prevention, and secure enterprise mesh across the 2.4 GHz and 5 GHz RF spectrums.

The AP-65 access point supports diverse deployment options, delivering secure mobility network services and applications for high-performance enterprise and campus environmentsbranch offices and retail spaces, as well as deployments over public and private networks as a Remote AP. Centrally managed from an Aruba mobility controller, the AP-65 empowers the network administrator with unparalleled control over services, security and deployment models. The AP-65 supports dual, integral, high-performance omnidirectional multi-band antennas. Its discretely packaged and lightweight design allows it to blend into the enterprise or retail environment with ease.

Specifications

Network Configuration

Wireless Access Point (IEEE 802.11a/b/g)
Air Monitor (IEEE 802.11a/b/g)

Antenna
AP-65 Integral Antenna Dual, integral, tri-band, high-gain, omni-directional antennas with 180 degrees rotational movement. Non-detachable.
Gain 2.4-2.5 GHz / 3.30 dBi
5.150 GHz / 2.50 dBi
5.350 GHz / 3.30 dBi
VSWR 1.5:1
Support for radio signal diversity
Wireless Radio Specifications

AP type: Dual-radio, dual-band
Supported Frequency Bands (country-specific restrictions apply):
2.400 - 2.4835 GHz
5.150 - 5.250 GHz
5.250 - 5.350 GHz
5.470 - 5.725 GHz
5.725 - 5.850 GHz
Available Channels: Controller-managed, dependent upon regulatory domain
Modulations:
802.11b: Direct-Sequence Spread-Spectrum (DSSS)
802.11a/g: Orthogonal Frequency Division Multiplexing (OFDM)
Transmit Power: Configurable in increments of 0.5 dBm
Association Rates (Mbps):
802.11b: 1, 2, 5.5, 11 with automatic fallback
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 with automatic fallback

Manageability

Management of all 802.11 parameters as AP
Network-wide AP management via:
CLI
WEB GUI
SNMPv3
Access point profiles
Management of all 802.11 parameters
Management by:
Geographical location
BSSID
Radio type

Interfaces (Electrical)
1 x 10/100 Base-TX (RJ-45) auto-sensing Ethernet interface Auto-sensing MDI/MDX
PoE 48V DC / 220mA power-over-Ethernet (802.3af compliant)
Supports Serial-over-Ethernet
Rear mounted
1 x 5V DC Power Interface
Interfaces (Mechanical)

1 x Integrated ceiling tile rail snap-in mount (for 15/16� diameter rails). Located on rear of device
1 x Kensington locking interface

Visual Indicators (LEDs)

(Ready) Power on/off/booting
(Ethernet 0/1) link status / activity
802.11a + b/g Wireless Access Point
802.11a + b/g Wireless Air Monitor

Power Requirements

External AC power or POE
5V DC / 2A supplied externally via optional country specific AC adapter kits
48V DC / 220mA power-over-Ethernet (802.3af compliant)

Device Dimensions (H/W/D)
Antenna Stowed 100 x 100 x 37mm (3.94 x 3.94 x 1.47 in.)
Antenna Extended 180 degrees 167 x 100 x 37mm (6.58 x 3.94 x 1.47 in.)
Weight TBD
Shipping Dimensions (H/W/D)

100 x 100 x 37mm (3.94 x 3.94 x 1.47 in.)
Weight: TBD USB 2.0

Environmental
Operating Temperature Temp: 0° to 50° C (32° to 122° F)
Storage and Transportation Temperature Range
Temp: -40° to +70° C (-40°F to +158°F)
Humidity 5% to 95% (non-condensing)
Altitude -8,000ft @ 28°C (82.4°F)
Mounting Options

Wall, ceiling, cube or desk stand
Enclosure supports integrated rear mounted snap-in 15/16� ceiling tile rail guides

Standards

Ethernet IEEE 802.3 / IEEE 802.3u
Wireless IEEE 802.11a/b/g
IEEE 802.3af

Radio Approvals
FCC DOC Part 15 Class B (digital portion)
FCC Part 15 Subpart C 15.247
FCC Part 15 Subpart E 15.407
ICES-003 Class B
RSS 210 (Canada)
VCCI Class B (Japan)
Telec 2.4, Channel 14 and 5GHz approved (Japan)
CE marked with NB letter of opinion for RTTE
ETS 300 328 2.4 GHz
ETS 301 893 5.4 GHz
ETS 301 489 EMC
MIC Korea
SRRC (China)
AS/NZS 3548 Class B
AS/NZS4771 (C-tick)
Safety Approvals

cULus listed
PSE Mark (AC Power Supply)
IEC 60950 CB certificate and report
UL Listed (UL60950)
UL Listed (Canadian Electrical Code/CSA 22.2 No. 60950)
EN60950 / IEC60950
UL Listed (UL2043)
EN 60601-1-1 & EN 60601-1-2: (MD compliance)