Aruba AP-124/AP-125

Aruba AP-124, AP-124ABG, AP-125, and AP-125ABG Access Points

Photo of Aruba Access Point 124 & 125

The Aruba AP-124 and AP-125 Access Points — and AP-124ABG and AP-125ABG Access Points that are upgradeable to 802.11n (Draft2.0) via software download - are 3x3 Multiple-In Multiple-Out (MIMO), dual-radio (concurrent 802.11a/n + b/g/n) operation capable of delivering combined wireless data rates of up to 600Mbps. The access points operate in 3x3 MIMO mode using existing 802.3af PoE infrastructure over a single Ethernet cable.

All four access points support legacy 802.11a/b/g clients. The AP-124ABG and AP-125ABG can be upgraded from 802.11a/b/g to 802.11n (Draft2.0) operation via software download.

Based on 2nd generation RF chips and high performance MIPS CPUs with hardware accelerated cryptographic processing, these access points can be used for wireless access, intrusion detection monitoring, traffic analysis, secure enterprise mesh, or remote access point applications across the 2.4-2.5GHz and 5GHz RF spectrums.

The mode of operation is determined by network-downloadable software, a feature that allows the access points to be re-purposed and updated without the expense of physically accessing the device.

Specifications

Application
High-performance 802.11n enterprise campus or branch office applications, high-performance secure-jack, indoor use.
Operating Mode
Multi-service concurrent 802.11a/n + b/g/n WLAN, 802.11a/b/g/n air monitor, Hybrid combination of WLAN/AM and Remote AP or secure Mesh Point. Configurable to support 802.11n draft 2.0 HT 20/40 channels or mixed-mode deployment IEEE 802.11a/b/g/n
Radios
Dual Radio - software configurable to support 2.4-2.5 GHz + 5 GHz
RF Management
Automatic transmit power and channel management control with auto coverage hole correction via ARM
Mobility Service Delivery
Virtual AP Services:
  • Supports up to 32 SSIDs per access point
  • Multiple captive portals per SSID
  • Supports any combination of encryption/authentication type per SSID
  • Session level QoS
  • VLAN load balancing
  • Guest account creation/management
Voice Services:
  • Wireless Multi-media QoS (WMM)
  • 802.1p and DSCP to WMM AC tagging
  • Upstream traffic prioritization
  • Call Admission Control (CAC)
  • Traffic classification/session bandwidth reservation (T-SPEC/TCLAS)
  • Unscheduled power save delivery (U-APSD)
  • Stateful session awareness (soft voice client QoS):
    • SIP
    • NOE
    • Cisco Skinny
    • Vocera
  • Spectralink Voice Prioritization (SVP)
  • Support for Proxy-ARP and multicast filtering
  • Battery Boost
  • Priority queuing
  • Voice-aware scanning support in ARM
802.11a Radio Specifications
Operating Frequency: 5.150 GHz – 5.950 GHz*
Available Channels: Mobility Controller-managed, dependent upon configured regulatory domain
Modulation: Orthogonal Frequency Division Multiplexing (OFDM)
Transmit Power:
  • 20 dBm / 100 mW*
  • Configurable in increments of 0.5 dBm
Association Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 with automatic fallback
802.11b Radio Specifications
Operating Frequency: 2.4 GHz – 2.5 GHz
Available Channels: Mobility Controller-managed, dependent upon configured regulatory domain
Modulation: Direct-Sequence Spread-Spectrum (DSSS)
Transmit Power:
  • 20 dBm / 100 mW*
  • Configurable in increments of 0.5 dBm
Association Rates (Mbps): 11, 5.5, 2, 1 with automatic fallback
802.11g Radio Specification
Operating Frequency: 2.4 GHz – 2.5 GHz
Available Channels: Mobility Controller-managed, dependent upon configured regulatory domain
Modulation: Orthogonal Frequency Division Multiplexing (OFDM)
Transmit Power:
  • 20 dBm / 100 mW*
  • Configurable in increments of 0.5 dBm
Association Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 with automatic fallback
802.11n Radio Specifications
Operating Frequency: 2.4 GHz – 2.5 GHz and 5.150 GHz – 5.950 GHz*
Available Channels: Mobility Controller-managed, dependent upon configured regulatory domain
Modulation: 802.11n draft 2.0
Transmit Power:
  • 20 dBm / 100 mW*
  • Configurable in increments of 0.5 dBm
Association Rates (Mbps): MSC0 - MSC15 (6.5Mbps - 300Mbps)
Radio: 2x3, 3x3 Multiple-In, Multiple-Out (MIMO)
High-Throughput (HT) Support: HT 20/40
Packet Aggregation: A-MPDU, A-MSDU
Available Channels 802.11a/b/g and 802.11n
*Centrally managed by Mobility Controller, based on configured regulatory domain
Antenna
AP-124: Tri (3x3), RP-SMA interfaces for external antenna support (supports up to 3x3 MIMO with spatial diversity)
AP-125: Integral, Tri (3x3), Omni-directional multi-band dipole antenna elements (supports up to 3x3 MIMO with spatial diversity)
AP-125 Antenna Max Gain:
  • 2.4 GHz-2.5 GHz / 3.2 dBi
  • 5.150 GHz- 5.875 GHz / 5.2 dBi
Interfaces
Network:
  • 2 x 100/1000Base-T Ethernet (RJ45), Auto-sensing link speed and MDI/MDX
  • 48 V DC 802.3af or 802.3at or PoE + interoperable Power-over-Ethernet (PoE) with intelli-source PSE sourcing intelligence (both ports).
Antenna (model AP-124 only): 3 x RP-SMA antenna interfaces (supports up to 3x3 MIMO with spatial diversity)
Other:
  • 1 x RJ-45 console interface
  • 5.150 GHz- 5.875 GHz / 5.2 dBi
Power
48 V DC 802.3af or 802.3at or PoE + interoperable Power-over-Ethernet (PoE) with intelli-source PSE sourcing intelligence (both ports).
5 V DC for external AC supplied power (adapter sold separately)
Mounting
Standard:
  • Desk-top (stand)
  • Wall
  • Tool-less Ceiling tile rail (15/16”)
Optional mounting kit:
  • Solid wall stand-off
  • Ceiling tile rail (15/16” & 9/16” recessed or non-recessed)
Security: Kensington security lock point (model AP-125 only)
Mechanical
Dimensions / Weight:
  • 4.9” x 5.13” x 2.0“
  • 124 mm x 130 mm x 51 mm
  • 15oz/0.42 Kgs
Environmental
Operating:
  • Temp: 0° to 50° C (32° to 122° F)
  • Humidity: 5 to 95% non-condensing
Storage: Temp: 0° to 70° C (32° to 158° F)
Regulatory
FCC Part 15
Industry of Canada
VCCI
MIC
Anatel
NOM/COFETEL
SRRC
GS Mark
CE Mark
R&TTE Directive 1995/5/EC
Low Voltage Directive 72/23/EEC
EN 300 328
EN 301 893
EN 301 489
UL/IEC/EN 60950-1:2001
CB, cULus
AS/NZS 4268, 4771
UL2043 Listed
For more country-specific regulatory information, and approvals, please see your Aruba representative.
Certifications
Wi-Fi certified: 802.11a/b/g/n Draft 2.0
Warranty
1 year parts/labor**
**Extended with support contract
Part Numbers
Access Point:
  • AP-124
  • AP-125
Accessories:
  • AP-120-MNT (mount kit)
  • AP-ANT-1 to 14 (detachable antennas) use with AP-120 only
AC Power Adapters Available
Remote AP Licenses:
  • LIC-1-RAP
  • LIC-4-RAP
  • LIC-6-RAP
  • LIC-8-RAP
  • LIC-16-RAP
  • LIC-24-RAP
  • LIC-48-RAP
  • LIC-64-RAP
  • LIC-128-RAP
  • LIC-256-RAP
Indoor Mesh AP Licenses:
  • LIC-1-IMP
  • LIC-2-IMP
  • LIC-4-IMP
  • LIC-6-IMP
  • LIC-8-IMP
  • LIC-16-IMP
  • LIC-24-IMP
  • LIC-32-IMP
  • LIC-48-IMP
  • LIC-64-IMP
  • LIC-128-IMP
  • LIC-256-IMP