Aruba AP-80MB/AP-80SB
Aruba AP-80SB &AP-80MB Dual-Radio Wireless Access Points
The Aruba AP-80SB and AP-80MB access points are the ideal wireless solution for harsh outdoor environments where conventional Wi-Fi access points or wireless bridges cannot be deployed.
The AP-80SB and AP-80 MB are dual-radio 802.11a/ b/g access points with wireless backhaul capability that can also function as secure WDS point-to-point or point-to-multipoint bridges. Designed for extreme, all-weather deployment, the AP-80SB and AP-80MB offer a flexible solution that supports a variety of applications using attachable antennas and an integrated PPP-over-Ethernet client to enable remote deployments over service provider networks.
Specifications
Network Configuration
| AP-80SB | |
|---|---|
| Stand-alone Wireless Access Point (802.11b/g) with support for wireless backhaul over 5 GHz | Point to Point WDS Bridge for 5 GHz or 2.4 GHz |
| AP-80MB | |
| Stand-alone Wireless Access Point (802.11a/b/g) with support for wireless backhaul over 5 GHz or 2.4 GHz | |
| Point-to-Point WDS Bridge for 5 GHz or 2.4 GHz | |
| Point-to-Multi-Point WDS Bridge for 5 GHz or 2.4 GHz | |
Antennas
| AP-80SB | |
|---|---|
| Integral 5 GHz Antenna Specifications | |
| Gain | (5.150 ~ 5.850 GHz) 17.0 dBi |
| VSWR 1.5:1 | |
| Front to Back Ratio >25dB | |
| Frequency Range 5.150 ~ 5.850 GHz | |
| VSWR 1.8:1 | |
| Power handling 10W | |
| Pattern: 30 degree beam width directional | |
| Application – wireless backhaul / WDS bridging | |
| AP-80MB | |
| None. External N-type female antenna interfaces only (see electrical interfaces) | |
Radio Specs – 802.11a (5 GHz)
| Frequency Bands Supported |
|
| Radio technology | orthogonal frequency division multiplexing (OFDM) |
| Modulation type | BPSK, QPSK, 16-QAM, 64-QAM |
| Transmit power | configurable by system administrator/professional installer |
| MAC | CSMA/CA with ACK |
| Operating channels |
|
| Data rates (Normal) | 6, 9, 12, 18, 24, 36, 48, 54 Mbps per channel |
| Data rates (Turbo) | 12, 18, 24, 36, 48, 54, 72, 96, 108 Mbps per channel |
| Radio band selectable via software | |
Radio Specs – 802.11b (2.4 GHz)
| Frequency bands | 2.400 ~ 2.4835/2.497 GHz (Global), channels country specific |
| Radio technology | direct sequence spread spectrum (DSSS) |
| Modulation type | CCK, BPSK, QPSK |
| Transmit power | configurable by system administrator |
| MAC | CSMA/CA with ACK |
| Operating channels |
|
| Data rates | 1, 2, 5.5, 11 Mbps per channel |
| Radio band selectable via software | |
Radio Specs – 802.11g (2.4 GHz)
| Frequency bands | 2.400 ~ 2.4835 GHz (Global), channels country specific |
| Radio technology | orthogonal frequency division multiplexing (OFDM) |
| Modulation type | BPSK, QPSK, 16 QAM, 64-QAM |
| Transmit power | configurable by system administrator |
| MAC | CSMA/CA with ACK |
| Operating channels |
|
| Data rates (Normal) | 6, 9, 12, 18, 24, 36, 48, 54 Mbps per channel |
| Data rates (Turbo) | 12, 18, 24, 36, 48, 54, 72, 96, 108 Mbps per channel |
| Radio band selectable via software | |
Manageability
| Management of all 802.11 parameters as AP / Bridge | |
| Network-wide AP management via: |
|
| Authentication support | Local MAC, RADIUS MAC, Local User Database, RADIUS, IEEE 802.1x |
| Encryption support | 64-bit / 128-bit / 152-bit WEP, WEP Pre-shared Key, TKIP, AES, WPA, 802.1x |
Interfaces (Electrical)
| AP-80SB/MB Common Interfaces | |
|---|---|
| 1 x 10/100 Base-TX auto-sensing Ethernet interface (IP67 8-pin male (pole) M12 circular DIN connector (Au) contacts) |
|
| 1 x RSSI Low Voltage BNC Interface | |
| 1 x Electrical Ground / Safety Terminal | |
| AP-80SB Interfaces | |
| 2 x 2.4 GHz N-Type Female Antenna Interface | |
| AP-80MB Interfaces | |
| 1 x 2.4 GHz N-Type Female Antenna Interface | |
| 1 x 5 GHz N-Type Female Antenna Interface | |
| Power Adapter (AP-AC-80-1) Interfaces | |
| Access Point (AP) Port: 1 x 10/100 Base-TX auto-sensing Ethernet (RJ-45) network (AP) interface |
|
| Network (ENET) Port: 1 x 10/100 Base-TX auto-sensing Ethernet (RJ-45) network (ENET) |
Auto-sensing MDI/MDX Ethernet Interface Supplied with 8-Pin DIN to RJ-45 CAT-5 Shielded Ethernet Cable (50 m / 164 ft) |
Interfaces (Mechanical)
| 4 x Mounting Bracket Hex Screw Mounting Points |
| Ruggedized wall, pole or mast mount hardware provided (articulating in horizontal and vertical planes) |
Visual Indicators (LEDs)
| (Ready) Power on/off (provided on Power Injector) |
Power Requirements
| 48V DC / 1.2A (30W) Power-over-Ethernet (non-standard 802.3af) |
| External Power Injector, auto-sensing 100-240V AC Input, 1.5A Output 48 VDC, 1.2A (30W) |
Device Dimensions (H/W/D)
| Dimensions | 198 x 198 x 70mm (7.80 x 7.80 x 2.76in.) |
| Weight | 1.6Kg (3.53lbs) |
Shipping Dimensions (H/W/D)
| Dimensions | 500 x 300 x 170mm (19.7 x 11.8 x 6.7in.) |
| Gross Weight | 6Kg (13.22lbs) |
Environmental
| AP-80 | |
|---|---|
| Operating Temperature | -30 to 55 °C (-22 to 131 °F) |
| Storage Temperature | -40 to 80 °C (-40 to 176 °F) |
| Humidity | 0% to 95% (non-condensing) |
| Survival Wind Speed | 201Km/h (125mph) |
| Power Adapter (AP-AC-80-1) | |
| Operating Temperature | 0 to 60 °C (32 to 140 °F) |
| Storage Temperature | -50 to 70 °C (-58 to 158 °F) |
| Humidity | 0% to 95% (non-condensing) |
Mounting Options
| Wall, pole or mast mount options |
Standards
| Ethernet IEEE 802.3 / IEEE 802.3u |
| Wireless IEEE 802.11a/b/g |
| PPP over Ethernet RFC2516 |
Radio Aprovals
| FCC DOC Part 15 Class B (digital portion) | |
| FCC Part 15 Subpart C 15.247 | |
| FCC Part 15 Subpart E 15.407 | |
| ICES-003 Class B | |
| RSS 210 (Canada) | |
| VCCI Class B (Japan) | |
| Telec 2.4, Channel 14 and 5GHz approved (Japan) | |
| CE marked with NB letter of opinion for RTTE |
|
| MIC Korea | |
| SRRC (China) | |
| AS/NZS 3548 Class B | |
| AS/NZS4771 (C-tick) | |
Safety Aprovals
| cULus listed |
| PSE Mark (AC Power Supply) |
| IEC 60950 CB certificate and report |
| UL Listed (UL60950) |
| UL Listed (Canadian Electrical Code/CSA 22.2 No. 60950) |
| EN60950 / IEC60950 |
Warranty
| 1 year limited parts/labor* |