Aruba 210 Series

210_Series_408x436

High-performance, cost-effective gigabit Wi-Fi for the enterprise

Contact Sales
  • High-performance and cost-effective 210-series 802.11ac APs maximize mobile device performance in medium- to high-density Wi-Fi environments.

    Leveraging three spatial streams, these dual-radio APs deliver wireless data rates up to 1.3 Gbps for 802.11ac and up to 450 Mbps for 802.11n-enabled mobile devices.

    The AP-215 and IAP-215 models have six integrated omni-directional downtilt antennas, while the AP-214 and IAP-214 support external, detachable dual-band antennas using three RP-SMA connectors.

    • Not just faster, smarter

      With AppRF™ and ClientMatch™, 210-series APs protect business-critical apps and eliminate sticky clients while roaming.

    • Friendly to Aruba Bluetooth Beacons

      Connect Aruba Beacons to any 210-series USB port to deliver indoor location services that can be centrally managed.

    • You have the freedom to choose

      The 210 series can be managed by an Aruba Mobility Controller or deployed in controllerless Aruba Instant mode.

    • 210 SERIES ACCESS POINT SPECIFICATIONS
      • AP-215 and IAP-215
        • 2.4-GHz (450 Mbps max rate) and 5-GHz (1.3 Gbps max rate) radios, each with 3×3 MIMO and six integrated omni-directional downtilt antennas.
      • AP-214 and IAP-214
        • 2.4-GHz (450 Mbps max rate) and 5-GHz (1.3 Gbps max rate) radios, each with 3×3 MIMO and three combined, diplexed (dual-band) external RP-SMA antenna connectors.
      ADVANCED FEATURES
      • RF management
        • Adaptive Radio Management™ (ARM) technology automatically assigns channel and power settings, provides airtime fairness and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs.
        • 210 series APs can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend corporate resources to remote locations, and wireless mesh connections where Ethernet drops are not available.
      • Spectrum analysis
        • Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference
      • Security
        • Integrated wireless intrusion protection offers thread protection and mitigation, and eliminates the need for separate RF sensors and security appliances.
        • IP reputation and security services identify, classify, and block malicious files, URL and IPs, providing comprehensive protection against advanced online threats.
        • Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys.
        • SecureJack-capable for secure tunneling of wired Ethernet traffic.
      POWER
      • Maximum (worst-case) power consumption: 14.9 watts (PoE) or 13.6 watts (DC)
        • Excludes power consumed by external USB device (and internal overhead); this could add up to 6 watts (PoE) or 5.5 watts (DC) for 5W/1A USB device
      • Maximum (worst-case) power consumption in idle mode: 8.2 watts (PoE) or 7.4 watts (DC)
      • Direct DC source: 12 Vdc nominal, +/- 5%
      • Power over Ethernet: 48 Vdc (nominal) 802.3af/802.3at compliant source
        • USB port is disabled when using an 802.3af PoE power source; for unrestricted operation with PoE power, use an 802.3at compliant source
      • Power sources sold separately
      • When both power sources are available, DC power takes priority
      WIRELESS RADIO SPECIFICATIONS
      • AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n 3×3:3
      • Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
      • 3×3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate
      • Supported frequency bands (country-specific restrictions apply):
        • 2.4000 to 2.4835 GHz
        • 5.150 to 5.250 GHz
        • 5.250 to 5.350 GHz
        • 5.470 to 5.725 GHz
        • 5.725 to 5.850 GHz
      • Available channels: Dependent on configured regulatory domain
      • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
      • Supported radio technologies:
        • 802.11b: Direct-sequence spread-spectrum (DSSS)
        • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
      • Supported modulation types:
        • 802.11b: BPSK, QPSK, CCK
        • 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
      • Transmit power: Configurable in increments of 0.5 dBm
      • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
        • 2.4-GHz band: +23 dBm (18 dBm per chain)
        • 5-GHz band: +23 dBm (18 dBm per chain)
        • Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain
      • Advanced Cellular Coexistence (ACC) minimizes interference from LTE cellular networks
      • Maximum ratio combining (MRC) for improved receiver performance
      • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
      • Short guard interval for 20-MHz, 40-MHz and 80-MHz channels
      • Space-time block coding (STBC) for increased range and improved reception
      • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
      • Transmit beamforming (TxBF) for increased signal reliability and range
      • Supported data rates (Mbps):
        • 802.11b: 1, 2, 5.5, 11
        • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
        • 802.11n: 6.5 to 450 (MCS0 to MCS23)
        • 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3)
      • 802.11n high-throughput (HT) support: HT 20/40
      • 802.11n/ac packet aggregation: A-MPDU, A-MSDU
      • 802.11ac very high throughput (VHT) support: VHT 20/40/80
      ANTENNAS
      • AP-214/IAP-214: Three RP-SMA connectors for external dual-band antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.0 dB in 2.4 GHz and 2.0 dB in 5 GHz.
      • AP-215/IAP-215: Six integrated downtilt omni-directional antennas for 3×3 MIMO with maximum antenna gain of 5.0 dBi in 2.4 GHz and 5.0 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. Downtilt angle for maximum gain is roughly 30 degrees.
    • OTHER INTERFACES
      • One 10/100/1000BASE-T Ethernet network interface (RJ-45)
        • Auto-sensing link speed and MDI/MDX
        • 802.3az Energy Efficient Ethernet (EEE)
        • PoE-PD: 48 Vdc (nominal) 802.3af or 802.3at PoE
      • DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length
      • USB 2.0 host interface (Type A connector)
      • Visual indicators (LEDs):
        • Power/system status
        • Ethernet link status (ENET)
        • Radio status (two; RAD0, RAD1)
      • Reset button: factory reset (during device power-up)
      • Serial console interface (RJ-45)
      • Kensington security slot
      MOUNTING
      • Included with AP:
        • Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling
      • Spare mounting kit:
        • AP-220-MNT-C1: Aruba AP mount kit contains two ceiling-grid rail adapters for flat rails
      • Optional mounting kits:
        • AP-220-MNT-C2: Aruba AP mount kit contains two ceiling-grid rail adapters for Interlude and Silhouette style rails
        • AP-220-MNT-W1: Aruba AP mount kit contains one flat-surface wall/ceiling mount bracket
        • AP-220-MNT-W3: Aruba AP mount kit contains one flat-surface wall/ceiling secure mount cradle
      MECHANICAL
      • Dimensions/weight (unit, excluding mount accessories):
        • 180 mm x 180 mm x 45 mm (W x D x H)
        • 610 g
      • Dimensions/weight (shipping):
        • 220 mm x 225 mm x 55 mm (W x D x H)
        • 860 g
      ENVIRONMENTAL
      • Operating:
        • Temperature: 0° C to +50° C (+32° F to +122° F)
        • Humidity: 5% to 93% non-condensing
      • Storage and transportation:
        • Temperature: -40° C to +70° C (-40° F to +158° F)
      REGULATORY
      • FCC/Industry of Canada
      • CE Marked
      • R&TTE Directive 1999/5/EC
      • Low Voltage Directive 2006/95/EC
      • EN 300 328
      • EN 301 489
      • EN 301 893
      • UL/IEC/EN 60950
      • EN 60601-1-1, EN60601-1-2
      CERTIFICATIONS
      • CB Scheme Safety, cTUVus
      • UL2043 plenum rating
      • Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac
      WARRANTY
      Aruba limited lifetime warranty
      REGULATORY MODEL NUMBERS
      • AP-214 and IAP-214: APIN0214
      • AP-215 and IAP-215: APIN0215
      MINIMUM ARUBAOS VERSION
      • ArubaOS™ 6.4.2.0
      • Aruba InstantOS™ 4.1.1.0
      RELIABILITY
      • MTBF: 538,975 hours (61.5 years) at +25° C operating temperature
​​