RAP-2WG

Aruba RAP-2WG Remote Access Point

Photo of Remote Access Point RAP-2

The Aruba RAP-2WG is a single radio 802.11b/g, enterprise-class indoor remote access point, capable of supporting multiple functions including wired and wireless access and air monitoring/wireless intrusion detection and prevention across the 2.4GHz band.

The RAP-2WG remote access point delivers secure user-centric network services and applications in remote branch offices as well as for home office workers and telecommuters. Centrally managed from an Aruba Controller, the RAP-2WG provides the network administrator with unparalleled control over services and security. The RAP-2WG supports authenticated wired and wireless access, as well as policy based forwarding mechanisms to allow access to centralized and local resources.

Specifications

Print
Application
Remote office, home office, retail branch, remote learning, and fixed telecommuter. Indoor applications.
Wired Operating Modes
10/100 Ethernet
User authentication - 802.1X, Captive Portal, Mac Authentication, or Open Access
Policy based forwarding for local resource access
Wireless Operating Modes
802.11b/g WLAN or 802.11b/g Air Monitor
Radio
Single radio 802.11b/g
RF Management
Automatic transmit power and channel management control with auto coverage hole correction via Adaptive Radio Management (ARM)
802.11b Radio Specifications
Operating Frequency: 2.400GHz - 2.4835GHz
Available Channels: Mobility controller managed, dependent upon configured regulatory domain
Modulation: Direct-Sequence Spread-Spectrum (DSSS)
Transmit Power: Configurable in increments of 0.5 dBm
Association Rates (Mbps): 11, 5.5, 2, 1 with automatic fallback
802.11g Radio Specifications
Operating Frequency: 2.400GHz - 2.4835GHz
Available Channels: Mobility controller managed, dependent upon configured regulatory domain
Modulation: Orthogonal Frequency Division Multiplexing (OFDM)
Transmit Power: Configurable in increments of 0.5 dBm
Association Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 with automatic fallback
Available channels 802.11b/g
Centrally managed by mobility controller, based on configured regulatory domain
Antenna
Type: Omni-directional, detachable
Gain: 2.4 GHz-2.5 GHz / 1.5 dBi (nominal)
Interfaces
Network: 2 x 10/100Base-T Ethernet (RJ45), auto-sensing link speed and MDI/MDX
Antenna: 1 x Antenna port RP-SMA
Power: 1 x DC power connector
Other: 1 x reset button (resets device to factory defaults)
Power
Adapter (included):
  • AC Input: 100-240V/0.3A
  • DC Output: 12V/1A
Maximum Power Consumption: 6.5W
Mounting
Desk-top
Wall
Mechanical
Dimensions/Weight (excluding antenna):
  • 2.8" x 3.9" x 1.0" (70 mm x 100 mm x 26 mm)
  • 0.2 pounds (90g)
Dimensions/Weight (Shipping):
  • 6.5" x 10.2" x 2.4" (165 mm x 260 mm x 60 mm)
  • 0.88 pounds (400g)
Environmental
Operating
  • Temp: 0°C to +40°C (+32°F to +104°F)
  • Humidity: 5% to 95% (RH), non-condensing
Storage :
  • Temp: -40°C to +70°C (-40°F to +158°F)
  • Humidity: 5% to 95% (RH), non-condensing
Regulatory
FCC Part 15
Industry Canada
CE Mark
UL/IEC/EN 60950-1:2001
CB, cULus
For more country-specific regulatory information, and approvals, please see your Aruba representative.
Warranty
1 year limited parts/labor*

Remote Access Points