You are here: CLI Commands > show dhcp-allocation
Previous TopicNext Topic

show dhcp-allocation

show dhcp-allocation

Description

This command displays information about the DHCP address allocation.

Usage Guidelines

Use this command to view DHCP address allocation for network address translated clients to allow mobility of the clients across IAPs.

Example

The following example shows the output of show dhcp-allocation command:

(Instant Access Point)# show dhcp-allocation

---------------------/etc/dnsmasq.conf--------------------

listen-address=127.0.0.1

addn-hosts=/etc/ld_eth_hosts

addn-hosts=/etc/ld_ppp_hosts

dhcp-src=192.168.10.1

dhcp-leasefile=/tmp/dnsmasq.leases

dhcp-authoritative

filterwin2k

#magic-vlan

{

vlan-id=3333

dhcp-range=192.168.10.3,192.168.11.254,255.255.254.0,12h

dhcp-option=1,255.255.254.0

dhcp-option=3,192.168.10.1

dhcp-option=6,10.1.1.50

dhcp-option=54,192.168.10.1

}

---------------------/tmp/dnsmasq.leases------------------

Command History

Version

Description

Aruba Instant 6.2.1.0-3.3

This command is introduced.

Command Information

IAP Platform

Command Mode

All platforms

Privileged EXEC mode