Aruba 610 Series Wi-Fi 6E APs

Deliver the highest levels of performance with Wi-Fi 6E – greater capacity, wider channels, and less interference – in a compact, cost-effective form factor.

Meet Aruba’s compact, cost-effective Wi-Fi 6E access point

More capacity to meet growing demands. The new 610 Series provides fast, resilient, and secure Wi-Fi 6E connectivity in a compact and affordable platform.

Greater capacity with 6 GHz

Greater capacity with 6 GHz

The Aruba 610 Series extends all the benefits of Wi-Fi 6 to the 6 GHz band: speed, more 80/160 MHz channels, and less interference to support high-definition video and more clients.

Icon for budgeting Cost-effective and compact

Cost-effective and compact

For enterprises who needed more wireless capacity and/or wider channels, the Aruba 610 Series features two radios that can be tuned to any two of the three available spectrum bands for cost-effective connectivity in a compact form factor. The 610 Series provides tri-band coverage when deployed in a multi-AP environment.

Icon for high efficiency Highly efficient and secure

Highly efficient and secure

Wi-Fi 6E extends support to the 6 GHz band based on the 802.11ax standard. 802.11ax provides greater efficiency and higher levels of guest and password security with orthogonal frequency-division multiple access (OFDMA), Enhanced Open, and WPA3. The 610 Series APs also offer client optimization, automated radio frequency management, and intelligent power monitoring. 

Icon for Iot location ready Greater IoT support

Greater IoT support

Aruba 610 Series APs act as an IoT transport platform without the need to deploy or manage overlay gateways. The APs include integrated Bluetooth Low Energy 5 (BLE) and 802.15.4/Zigbee radios plus dynamic segmentation for added security making it easier to deploy and manage.

Compact and cost-effective Wi-Fi 6E platform

Ideal for branch and small campus environments, Aruba 610 Series Wi-Fi 6E APs offer fast, secure connectivity.

6 GHz support

Maximum combined 3.6 Gbps data rate for higher throughput and faster speeds indoors (when using 5 GHz and 6 GHz bands).

Configurable dual radios

Support for any two of three Wi-Fi 6E bands (2.4, 5, and 6 GHz) and can provide full Wi-Fi 6E coverage in a multi-AP environment.

Low power, compact form factor

Compact form with 802.3af, class 3 power and the ability to enable/disable capabilities based on available POE.

2.5 Gbps Smart Rate Ethernet port

Increase speed and minimize wired bottlenecks with a Smart Rate Ethernet port.

Indoor location ready

Built in GPS receivers and fine time measurement (FTM) enable APs to automatically locate themselves and serve as reference points for accurate client location.

Application assurance

Aruba Air Slice dynamically allocates and tunes radio resources to ensure application service levels and optimize the user experience.

Details and specifications for the Aruba 610 Series APs

Details and specifications for the Aruba 610 Series APs

Specifications

  • Hardware variants
    • AP-615: Internal antenna models
    Wi-Fi radio specifications
    • AP type: Indoor, dual-radio/tri-band 2.4GHz, 5GHz and 6GHz (dual concurrent) 802.11ax 2x2 MIMO
    • 2.4GHz radio: Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate with 2SS HE40 802.11ax client devices (287Mbps for HE20)
    • 5GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate with 2SS HE80 802.11ax client devices
    • 6GHz radio: Two spatial stream Single User (SU) MIMO for up to 2.4Gbps wireless data rate with 2SS HE160 802.11ax client devices
    • Up to 512 associated client devices per radio, and up to 16 BSSIDs per radio (limited to 4 for the 6GHz radio)
    • Supported frequency bands (country-specific restrictions apply)*:
      • 2.400 to 2.4835GHz ISM
      • 5.150 to 5.250GHz U-NII-1
      • 5.250 to 5.350GHz U-NII-2A
      • 5.470 to 5.725GHz U-NII-2C
      • 5.725 to 5.850GHz U-NII-3/ISM
      • 5.850 to 5.895GHz U-NII-4
      • 5.925 to 6.425GHz U-NII-5
      • 6.425 to 6.525GHz U-NII-6
      • 6.525 to 6.875GHz U-NII-7
      • 6.875 to 7.125GHz U-NII-8
    • Available bands and channels: Dependent on configured regulatory domain (country)
    • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum in the 5GHz band
    • Supported radio technologies:
      • 802.11b: Direct-sequence spread-spectrum (DSSS)
      • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
      • 802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 8 resource units
    • Supported modulation types:
      • 802.11b: BPSK, QPSK, CCK
      • 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM and 256-QAM (proprietary extension)
      • 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM (proprietary extension)
      • 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM
    • 802.11n high-throughput (HT) support: HT20/40
    • 802.11ac very high throughput (VHT) support: VHT20/40/80
    • 802.11ax high efficiency (HE) support: HE20/40/80/160
    • Supported data rates (Mbps):
      • 802.11b: 1, 2, 5.5, 11
      • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
      • 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40), 400 with 256-QAM (proprietary extension)
      • 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80); 1,083 with 1024-QAM (MCS10 and MCS11, proprietary extension)
      • 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
      • 802.11ax (5GHz): 3.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)
      • 802.11ax (6GHz): 3.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160)
    • 802.11n/ac packet aggregation: A-MPDU, A-MSDU
    • Transmit power: Configurable in increments of 0.5 dBm
    • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
      • Per radio/band (2.4GHz / 5GHz / 6GHz): +21 dBm (18dBm per chain)
      • Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain.
    • Advanced Cellular Coexistence (ACC) minimizes the impact of interference from cellular networks
    • Maximum ratio combining (MRC) for improved receiver performance
    • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
    • Space-time block coding (STBC) for increased range and improved reception
    • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
    • Transmit beam-forming (TxBF) for increased signal reliability and range
    • 802.11ax Target Wait Time (TWT) to support low-power client devices
    • 802.11mc Fine Timing Measurement (FTM) for precision distance ranging

    * When configured for concurrent operation in 5GHz and 6GHz (only), the U-NII-4 band will be disabled

    Wi-Fi antennas
    • AP-615: Integrated downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 2.8dBi in 2.4GHz, 4.5dBi in 5GHz and 4.5dBi in 6GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 to 40 degrees.
      • Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 2.0dBi in 2.4GHz, 3.5dBi in 5GHz and 3.4dBi in 6GHz.
    Other interfaces
    • E0: Ethernet wired network ports (RJ-45)
      • Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX
      • 2.5Gbps speed complies with NBase-T and 802.3bz specifications
      • POE-PD: 48Vdc (nominal) 802.3af/at POE (class 3 or higher)
      • 802.3az Energy Efficient Ethernet (EEE)
    • DC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length
    • USB 2.0 host interface (Type A connector)
      • Capable of sourcing up to 1A / 5W to an attached device
    • Bluetooth Low Energy (BLE5.0) and Zigbee (802.15.4) radio
      • BLE: up to 5dBm transmit power (class 1) and -100dBm receive sensitivity (125kbps)
      • Zigbee: up to 5dBm transmit power and -97dBm receive sensitivity (250kbps)
      • Integrated omnidirectional antenna with roughly 30 to 40 degrees downtilt and peak gain of 2.6dBi
    • GNSS L1 (1575.42MHz) receiver supporting GPS, Galileo, GLONASS and BeiDou signals
      • Receive sensitivity: -162dBm (tracking)
      • Integrated omnidirectional antenna with roughly 30 to 40 degrees downtilt and peak gain of 2.3dBi
    • Advanced IOT Coexistence (AIC) allows concurrent operation of multiple radios in the 2.4GHz band
    • Built-in Trusted Platform Module (TPM) for enhanced security and anti-counterfeiting
    • Visual indicators (four multi-color LEDs): for System (1x) and Radio (3x) status
    • Reset button: factory reset, LED mode control (normal/off)
    • Serial console interface (proprietary, micro-B USB physical jack)
    • Kensington security slot
    • Automatic thermal shutdown and recovery function
  • Power sources and power consumption
    • The AP supports direct DC power and Power over Ethernet (POE) on port E0
    • When both DC and POE power sources are available, DC power takes priority over POE
    • Power sources are sold separately; see the 610 Series Ordering Guide for details
    • When powered by DC or 802.3at (class 4) POE, the AP will operate without restrictions
    • When powered by 802.3af (class 3) POE with the IPM feature disabled, the AP will disable the USB port
    • With IPM enabled, the AP will start up in unrestricted mode but may dynamically apply restrictions depending on the available power budget and actual consumption. The feature restrictions and order in which these get applied are configurable.
    • Maximum (worst-case) power consumption (without / with a USB device attached):
      • DC powered: 12.5W/18.2W
      • POE powered: 14.7W/20.9W
      • This assumes that up to 5W is supplied to the attached USB device
    • Maximum (worst-case) power consumption in idle mode: 5.6W/11.0W (DC) or 6.9W/12.9W (POE)
    • Maximum (worst-case) power consumption in deep-sleep mode: 1.0W (DC) or 1.8W (POE)
    Mounting details
    • A mounting bracket has been pre-installed on the back of the AP. This bracket is used to secure the AP to any of the mount kits (sold separately); see the 610 Series Ordering Guide for details.
    Mechanical specifications
    • Dimensions/weight (AP-615; unit without mount bracket):
      • 160mm (W) x 160mm (D) x 39mm (H)
      • 520g
    • Dimensions/weight (AP-615; shipping):
      • 212mm (W) x 194mm (D) x 66mm (H)
      • 800g
    Environmental specifications
    • Operating conditions
      • Temperature: 0C to +50C / +32F to +122F
      • Relative humidity: 5% to 95%
      • ETS 300 019 class 3.2 environments
      • AP is plenum rated for use in air-handling spaces
    • Storage conditions
      • Temperature: -25C to +55C / -13F to +131F
      • Relative humidity: 10% to 100%
      • ETS 300 019 class 1.2 environments
    • Transportation conditions
      • Temperature: -40C to +70C / -40F to +158F
      • Relative humidity: up to 95%
      • ETS 300 019 class 2.3 environments
    Reliability
    • Mean Time Between Failure (MTBF): 540khrs (62yrs) at +25C operating temperature
    Regulatory compliance
    • FCC/ISED
    • CE Marked
    • RED Directive 2014/53/EU
    • EMC Directive 2014/30/EU
    • Low Voltage Directive 2014/35/EU
    • UL/IEC/EN 60950
    • IEC/EN 62368-1
    • EN 60601-1-1, EN60601-1-2
    • For more country-specific regulatory information and approvals, please see your Aruba representative.
    Regulatory model numbers
    • AP-615 (all models): APIN0615
    Certifications
    • UL2043 plenum rating
    • Wi-Fi Alliance (WFA):
      • Wi-Fi CERTIFIED a, b, g, n, ac
      • Wi-Fi CERTIFIED 6E (ax, 6GHz)
      • WPA, WPA2 and WPA3 – Enterprise with CNSA option, Personal (SAE), Enhanced Open (OWE)
      • WMM, WMM-PS, Wi-Fi Vantage, W-Fi Agile Multiband
      • Passpoint (release 2)
      • Wi-Fi location
    • Bluetooth SIG
    • Ethernet Alliance (POE, PD device, class 4)
    Warranty
    Minimum operating system software versions
    • ArubaOS and Aruba InstantOS 8.11.0.0

Related products

Find information on Aruba products that complement the 610 Series Wi-Fi 6E APs or another solution that might better suit your needs.

630 Series Wi-Fi 6E APs

  • High-capacity Wi-Fi 6E campus access points
  • Up to 3.9 Gbps combined peak data rate
  • Tri-radio 2x2 in all three bands

650 Series Wi-Fi 6E APs

  • Our most powerful Wi-Fi 6E indoor AP
  • Up to 7.8 Gbps combined peak data rate
  • High availability with configurable 5 Gbps dual Ethernet ports
Aruba 510 series access points

510 Series Wi-Fi 6 APs

  • Midrange Wi-Fi 6 (802.11ax) AP
  • 69 Gbps combined peak data rate
  • 2.5 Gbps Smart Rate port

Ready to get started?