HPE Aruba Networking 750 Series Wi-Fi 7 Campus Access Points
Our flagship Wi-Fi 7 APs deliver ultra-high performance and capacity, more IoT support, and sub-1 meter location precision.
Fast, flexible, and built for the future
Perfect for the most demanding client and IoT use cases, the 750 Series APs deliver ultra-high performance and secure Wi-Fi 7 connectivity with intelligent automation and AI insights provided by AOS-10 and HPE Aruba Networking Central.
Ultimate Wi-Fi 7 performance
802.11be APs support up to three 320 MHz channels in 6 GHz, MLO, and 4K QAM.Flexible 4x4 radios
Three 4x4 MIMO radios and three Wi-Fi 7 bands (2.4, 5, and 6 GHz) with flexibility to support dual 5 GHz or dual 6 GHz radios1.10GbE wired connectivity
High availability with dual 10 Gbps ports for redundant Ethernet and power.Powerful IoT platform
Two integrated Bluetooth 6 and 802.15.4 radios for Zigbee and two USB-port extensions for connectivity to a wider range of devices.Self locating
Built-in GNSS receiver, barometric sensor, and support for FTM 802.11az for sub-one-meteraccuracy.Built-in security
WPA3, Enhanced Open, and WPA2-MPSK for stronger encryption and authentication, and MACsec for encrypted wired connection.Sustainability
AI-powered dynamic power save mode automatically adjusts AP power when connectivity demands arise.
1 Feature available in future software release.
Details and specifications for the HPE Aruba Networking 750 Series APs
Specifications
Hardware variants - HPE Aruba Networking AP‑754: External antenna models
- HPE Aruba Networking AP‑755: Internal antenna models
Wi-Fi radio specifications - AP type: Indoor, tri radio, 2.4 GHz, 5 GHz and 6 GHz (concurrent) 802.11be 4x4 MIMO
- 2.4 GHz radio: Four spatial stream Single User (SU) MIMO for up to 1.4 Gbps wireless data rate with 4SS EHT40 802.11be client devices
- 5 GHz radio: Four spatial stream Single User (SU) MIMO for up to 5.8 Gbps wireless data rate with 2SS EHT160 802.11be client devices
- 6 GHz radio: Four spatial stream Single User (SU) MIMO for up to 11.5 Gbps wireless data rate with 2SS EHT320 802.11be client devices
- MU‑MIMO (downlink, uplink) is supported on all radios
- Up to 512 associated client devices per radio, and up to 16 BSSIDs per radio
- Supported frequency bands (country‑specific restrictions apply):
- 2.400 to 2.4835 GHz ISM
- 5.150 to 5.250 GHz U‑NII‑1
- 5.250 to 5.350 GHz U‑NII‑2
- 5.470 to 5.725 GHz U‑NII‑2E
- 5.725 to 5.850 GHz U‑NII‑3/ISM
- 5.850 to 5.895 GHz U‑NII‑4
- 5.925 to 6.425 GHz U‑NII‑5
- 6.425 to 6.525 GHz U‑NII‑62
- 6.525 to 6.875 GHz U‑NII‑7
- 6.875 to 7.125 GHz U‑NII‑8
- Available bands and channels: Dependent on configured regulatory domain (country)
- Dynamic frequency selection (DFS) optimizes the use of available RF spectrum in the 5 GHz band
- Including Zero-Wait DFS (ZWDFS) to accelerate channel changes
- Supported radio technologies:
- 802.11b: Direct‑sequence spread‑spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal frequency‑division multiplexing (OFDM)
- 802.11ax/be: Orthogonal frequency‑division multiple access (OFDMA) with up to 37 resource units
- Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16‑QAM, 64‑QAM and 256‑QAM (proprietary extension)
- 802.11ac: BPSK, QPSK, 16‑QAM, 64‑QAM, 256‑QAM and 1024‑QAM (proprietary extension)
- 802.11ax: BPSK, QPSK, 16‑QAM, 64‑QAM, 256‑QAM, and 1024‑QAM
- 802.11be: BPSK, QPSK, 16‑QAM, 64‑QAM, 256‑QAM, 1024‑QAM, and 4096‑QAM
- 802.11n high throughput (HT) support: HT20/40
- 802.11ac very high throughput (VHT) support: VHT20/40/80/160
- 802.11ax high efficiency (HE) support: HE20/40/80/160
- 802.11be extreme high throughput (EHT) support: EHT20/40/80/160/320
- Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 600 (MCS0 to MCS15, HT20 to HT40)
- 802.11ac: 6.5 to 3,467 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160)
- 802.11ax: 7.3 to 4,804 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE160)
- 802.11be: 7.3 to 11,530 (MCS0 to MCS13, NSS = 1 to 4, EHT20 to EHT320)
- 802.11n/ac packet aggregation: A‑MPDU, A‑MSDU
- Transmit power: Configurable in increments of 0.5 dBm
- Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements)
- Per radio/band (2.4 GHz/5 GHz/6 GHz): +24 dBm (18 dBm per chain)
- Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain.
- Advanced Cellular Coexistence (ACC) minimizes the impact of interference from cellular networks
- Ultra Tri‑Band (UTB) enables ultimate flexibility in 5 GHz and 6 GHz channel selection without performance degradation
- Maximum ratio combining (MRC) for improved receiver performance
- Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
- Space‑time block coding (STBC) for increased range and improved reception
- Low‑density parity check (LDPC) for high‑efficiency error correction and increased throughput
- Transmit beam‑forming (TxBF) for increased signal reliability and range
- 802.11ax Target Wait Time (TWT) to support low‑power client devices
- 802.11mc/az Fine Timing Measurement (FTM) for precision distance ranging
Wi-Fi antennas - HPE Aruba Networking AP‑754: Two sets of four (female) RP‑SMA connectors for external antennas (A0 through A3 corresponding with radio chains 0 through 3 for the 2.4 GHz and 5 GHz radios, and B0 through B3 corresponding with radio chains 0 through 3 for the 6 GHz radio). Worst‑case internal loss between radio interface and external antenna connectors: 1.1dB in 2.4 GHz, 1.8dB in 5 GHz, and 2.8dB in 6 GHz.
- HPE Aruba Networking AP‑755: Integrated downtilt omni‑directional antennas for 4x4 MIMO with peak antenna gain of 5.3dBi in 2.4 GHz, 6.0dBi in 5 GHz (5.8dBi in dual‑5 GHz mode) and 6.0dBi in 6 GHz (5.9dBi in dual‑6 GHz mode). Built‑in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 to 40 degrees.
- Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 3.1dBi in 2.4 GHz, 3.6dBi in 5 GHz (3.7dBi in dual‑5 GHz mode) and 3.6dBi in 6 GHz (3.6dBi in dual‑6 GHz mode).
Other interfaces and features - E0, E1: Two Ethernet wired network ports (RJ‑45)
- Auto‑sensing link speed (100/1000/2500/5000/10000BASE‑T) and MDI/MDX
- PoE‑PD: 48Vdc (nominal) 802.3af/at/bt PoE (class 3 or higher)
- 802.3az Energy Efficient Ethernet (EEE)
- Link aggregation (LACP) support between both network ports for redundancy and increased capacity
- MACsec support on E0 (802.1ae)
- DC power interface: 12Vdc (nominal, +/‑ 5%), accepts 2.1mm/5.5mm center‑positive circular plug with 9.5mm length
- U0, U1: Two USB 2.0 host interface (Type A connector)
- Capable of sourcing up to 2A/10W to one or two attached devices
- Flexible dual IOT radio options: BLE 5.4 (w/HADM), plus either BLE 5.4 or 802.15.4/Zigbee:
- BLE: BT5.4 with up to 1dBm transmit power (class 1) and ‑105dBm receive sensitivity (125 kbps)
- IEEE 802.15.4/Zigbee: up to 1dBm transmit power and ‑97dBm receive sensitivity (250 kbps)
- Integrated omnidirectional antenna with roughly 30 to 40 degrees downtilt and peak gain of 5.6dBi (AP‑754) or 6.0dBi (AP‑755)
- GNSS L1 (1575.42 MHz) and L5 (1176.45 MHz) receiver supporting GPS, Galileo, GLONASS, and BeiDou signal
- Receive sensitivity: ‑165dBm (tracking)
- Integrated omnidirectional antenna with roughly 30 to 40 degrees downtilt and peak gain of 3.0dBi (AP‑754) or 4.1dBi (AP‑755)
- Integrated barometric pressure sensor to determine (relative) deployment altitude of the AP
- Advanced IoT Coexistence (AIC) allows concurrent operation of multiple radios in the 2.4 GHz band
- Built‑in Trusted Platform Module (TPM) for enhanced security and anti‑counterfeiting
- Visual indicators (four multi‑color LEDs): for System (1x) and Radio (3x) status
- Reset button: factory reset, LED mode control (normal/off)
- Serial console interface (proprietary, micro‑B USB physical jack)
- Kensington security slot
- Automatic thermal shutdown and recovery function
Power sources and power consumption - The AP supports direct DC power and Power over Ethernet (PoE) on port E0 and/or E1
- When both DC and PoE power sources are available, DC power takes priority over PoE
- Power sources are sold separately; see the HPE Aruba Networking 750 Series Ordering Guide for details
- When powered by DC or 802.3bt (class 6) PoE, the AP will operate without restrictions
- Operating the AP with a single 802.3af (class 3 or lower) POE source is not supported, regardless of IPM status (except for AP staging)
- With IPM enabled, the AP will start up in unrestricted mode but may dynamically apply restrictions depending on the available power budget and actual consumption. The feature restrictions and order in which these get applied are configurable
- Maximum (worst case) power consumption (without/with USB devices attached):
- DC powered: 35W/46W.
- PoE powered: 40W/51W.
- This assumes that up to 10W is supplied to the attached USB device(s).
- Maximum (worst‑case) power consumption in idle mode: 14W/25W (DC) or 12W/23W (PoE).
- Maximum (worst‑case) power consumption in deep‑sleep mode: 2.4W (DC) or 3.5W (PoE).
Mounting details - A mounting bracket has been pre‑installed on the back of the AP. This bracket is used to secure the AP to any of the mount kits (sold separately); see the HPE Aruba Networking 750 Series Campus APs Ordering Guide for details.
Mechanical specifications - Dimensions/weight (HPE Aruba Networking AP‑755; unit without mount bracket):
- 260mm (W) x 260mm (D) x 57mm (H)
- 1530g
- Dimensions/weight (AP-755; shipping):
- 350mm (W) x 320mm (D) x 83mm (H)
- 2130g
Environmental specifications - Operating conditions
- Temperature: 0C to +50C/+32F to +122F
- Relative humidity: 5% to 95%
- ETS 300 019 class 3.2 environments
- AP is plenum rated for use in air‑handling spaces
- Storage conditions
- Temperature: ‑25C to +55C/‑13F to +131F
- Relative humidity: 10% to 100%
- ETS 300 019 class 1.2 environments
- Transportation conditions
- Temperature: ‑40C to +70C/‑40F to +158F
- Relative humidity: up to 95%
- ETS 300 019 class 2.3 environments
Reliability - Mean Time Between Failure (MTBF): 569 khrs (65 yrs) at +25C operating temperature (AP‑755)
General regulatory statements - HPE Aruba Networking WLAN Access Points (APs) comply with all regulatory rules that apply in the country they are configured for.
- In most countries these products may not be allowed to enable all available radios and channels, and various restrictions may apply (RF transmit power levels, radar detection, etc.).
- HPE Aruba Networking will continue to upgrade the software and regulatory restrictions that apply to these products to ensure they remain in compliance with the latest regulatory rules in the country of operation, and we will strive to ensure that the hardware and software capabilities of these products are maximized for each country.
- However, this does not imply a promise or commitment to enable all radios in all countries where we ship these products, and/or enabling all deployment scenarios (indoor/outdoor for example) that they can be configured for.
- Please consult your HPE Aruba Networking representative to confirm the latest regulatory status for each product in the country of operation and any anticipated future enhancements or other changes, as well as check the regulatory rules via the host country’s regulatory agencies for more.
Regulatory compliance - FCC/ISED
- CE Marked
- RED Directive 2014/53/EU
- EMC Directive 2014/30/EU
- Low Voltage Directive 2014/35/EU
- UL/IEC/EN 60950
- IEC/EN 62368‑1
- EN 60601‑1‑1, EN60601‑1‑2
- For more country‑specific regulatory information and approvals, please see your HPE Aruba Networking representative.
Regulatory model numbers - HPE Aruba Networking AP‑754 (all models): APIN0754
- HPE Aruba Networking AP‑755 (all models): APIN0755
Certifications - UL2043 plenum rating
- Wi-Fi Alliance (WFA):
- Wi‑Fi CERTIFIED a, b, g, n, ac, 6, 7
- WPA, WPA2 and WPA3 – Enterprise with CNSA option, Personal (SAE), Enhanced Open (OWE)
- WMM, WMM‑PS, W‑Fi Agile Multiband
- Passpoint (release 2)
- Bluetooth SIG
- Ethernet Alliance (PoE, PD device, class 6)
Warranty Minimum operating system software versions - HPE Aruba Networking Wireless Operating System AOS 10.7.0.0
Wi-Fi 7 is here
Wi-Fi 7 (IEEE 802.11be) is the new standard for WLAN that increases data rates using 320 MHz channels, multi-link operations (MLO), and the 6 GHz band.
Related products
Find information on products that complement the 750 Series Campus APs or another solution that might better suit your needs.
730 Series Campus Access Points
- Wi-Fi 7 indoor AP
- Up to 14.4 Gbps combined peak data rate
- High availability with configurable 5 Gbps dual Ethernet port
650 Series Campus Access Points
- Wi-Fi 6E indoor AP
- Up to 7.8 Gbps combined peak data rate
- High availability with configurable 5 Gbps dual Ethernet port
HPE Aruba Networking Central
Next-gen software that enables you to manage WLAN, switching, WAN, and VPN services using cloud, on-premises, or as-a-service options for all HPE Aruba Networking OS versions.
