Aruba 387 Series outdoor 60Ghz/5Ghz point-to-point access point

These high-performing access points are a reliable, simple to deploy, point-to-point solution built to endure extreme temperature and moisture.

For the harshest outdoor environments

Weather-proof and temperature-hardened, the 387 Series APs withstand the harshest outdoor environments.

Icon of a circuit connecting under a cloud Hardened outdoor point-to-point connectivity

Hardened outdoor point-to-point connectivity

The 387 Series APs are designed with the resiliency needed during inclement weather and to survive harsh conditions.

Icon of a circuit connection behind a gear Simplified point-to-point deployment

Simplified point-to-point deployment

The 387 Series APs take the pain out of deploying point-to-point Wi-Fi. They automatically form links, and the radios continuously adjust to optimize the connection.

Icon of full wi-fi signal inside a circuit IoT-ready

IoT-ready

The 387 Series APs include an integrated Bluetooth Low Energy radio to simplify the deployment and management of location services, asset tracking services, security solutions, and IoT sensors. Allowing the 387 Series APs to be leveraged as an IoT platform for outdoor environments eliminates the need for an overlay infrastructure and additional IT resources. 

Icon of three arrows ascending to the top, upper right and upper left outside of a box Flexible management options

Flexible management options

Available management solutions include Aruba Central (available in cloud-managed and on-premises options), as well as Aruba AirWave, which supports multi-vendor networks. APs can be deployed with zero-touch provisioning to reduce deployment time, centralize configuration, and simplify inventory management.

High-speed, outdoor, point-to-point

Weatherproof and temperature-hardened, the 387 Series APs deliver gigabit per second aggregate throughput at distances up to 400 meters (or 0.25 miles).

High-speed, outdoor, point-to-point connectivity

With a maximum concurrent on the air data rate of 2.5 Gbps in the 60GHz band and 867 Mbps in the 5GHz band, the 387 Series delivers an aggregate peak data rate of 3.37 Gbps.

Flexible, intelligent radio offering

The 387 Series access points include dual radio supports for 60GHz and 5GHz to provide throughput in good conditions and provide intelligent fallback if the 60GHz radio is impacted by heavy rainfall.

Secure infrastructure

The 387 Series APs help protect user authentication, wireless traffic, and data, with support for WPA and Enhanced Open, WPA-MPSK, and VPN tunnels.

Weatherproof and temperature-hardened

Supporting temperatures from -40°C to +60°C (-40°F to +140°F) and IP66/67 rated, the 387 Series can withstand the harshest environments.

Details and specifications for the Aruba 387 Series APs

Point-to-Point 60Ghz/5Ghz Radios

802.11ad 60Ghz radio and backup 5Ghz 2x2 with directional antennas

60Ghz Scanning Array Antenna

Scanning array antenna provides auto-alignment for maximum performance.

Integrated IoT Radio

IoT radio supports BLE and remote console.

Common Outdoor Access Point Mount

Shares common mounting solution for simplified outdoor access point installation

1G PoE Ethernet Ports with Intelligent Power Management

1Gbps Ethernet with included IP66/67 gland

Details and specifications for the Aruba 387 Series APs

Specifications

  • Wi-Fi Radio Specifications
    • AP type:
      • Temperature-hardened, dual radio, 60GHz 11ad and 5GHz 802.11ac 2x2 MIMO
    • 60 GHz 802.11ad 1x1 (2502.5 Mbps max rate) radio
      • 1 Spatial Stream for up to 2.5 Gbps
      • Internal scanning antenna
        • +/- 45° Azimuth Scan
        • +/- 17° Vertical Scan
    • 5GHz 802.11ac 2x2 MU-MIMO (867 Mbps max rate)
      • Two spatial stream MIMO for up to 867 Mbps wireless data
      • Internal directional antenna 9 dBi
    • Software-configurable dual radio supports 5 GHz (Radio 0) and 60GHz (Radio 1)
    • Supported frequency bands (country-specific restrictions apply):
      • 2.400 to 2.4835 GHz (BLE)
      • 5.150 to 5.250 GHz
      • 5.250 to 5.350 GHz
      • 5.470 to 5.725 GHz
      • 5.725 to 5.850 GHz
      • 5.825 to 5.875 GHz
      • 57 to 64 GHz
    • Available channels: Dependent on configured regulatory domain
    • Dynamic frequency selection (DFS) maximizes the use of available 5GHz RF spectrum.
    • Supported radio technologies:
      • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
      • 802.11ad: Single carrier (SC)
    • Supported modulation types:
      • 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
      • 802.11ad: BPSK, QPSK
    • Transmit power: Configurable in increments of 0.5 dBm for 5 GHz
    • Maximum EIRP (limited by local regulatory requirements):
      • 60GHz band: 40 dBm EIRP max
      • 5GHz band:  387: 34 dBm EIRP
    • Maximum ratio combining (MRC) for improved receiver performance on 5 GHz
    • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
    • Short guard interval for 20MHz, 40MHz, 80MHz on 5GHz
    • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
    • 802.11ac Transmit beam-forming (TxBF) for increased signal reliability and range
    • 802.11ad Beam Steering
    • Supported 11a/ac data rates (Mbps):
      • 802.11a 6, 9, 12, 18, 24, 36, 48, 54
      • 802.11n (5GHz): 6.5 to 600 (MCS0 to MCS15)
      • 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80)
    • 802.11n high-throughput (HT) support: HT 20/40
    • 802.11ac very high throughput (VHT) support: VHT 20/40/80/160
    • 802.11ad
    • 802.11n/ac packet aggregation: A-MPDU, A-MSDU
    Power
    • Worst-case power consumption: 13.5 W
    • Idle power consumption: 4.5W
    • Power sources sold separately
    • Power over Ethernet (PoE+): 802.3at-compliant
    • Power over Ethernet (PoE): 802.3af with some operational restriction:
      • Max conducted power per chain for 5GHz drops to 19 dBm
    Other Interfaces
    • One 10/100/1000BASE-T Ethernet network interfaces (RJ-45)
      • Auto-sensing link speed and MDI/MDX
      • 802.3az Energy Efficient Ethernet (EEE)
    • Bluetooth Low Energy (BLE) radio
      • Up to 4dBm transmit power (class 2) and -91 dBm receive sensitivity
    • Visual indicator (multi-color LED): For system and radio status
    • Reset button: Factory reset (during device power up)
    • Micro USB console interface
  • Mounting
    • AP-270-MNT-V1
    • AP-270-MNT-V2
    • AP-270-MNT-H1*
    • AP-270-MNT-H2*

    * Recommended bracket solutions for most apps.

    Mechanical
    • Dimensions (excluding mount adapter):
      • 18 cm (W) x 18 cm (D) x 10.1 cm (H)
    • Weight (excluding mount adapter):
      • 1.198 kg
    Environmental
    • Operating:
      • Temperature: -40°C to +60°C (-40°F to +140°F)
      • Humidity: 5% to 95% non-condensing
    • Storage and transportation:
      • Temperature: -40°C to +70°C (-40°F to +158°F)
    • Operating altitude: 3,000 m
    • Water and dust
      • IP66/67
    • Salt tolerance
      • Tested to ASTM B117-07A salt spray 200 hrs
    • Wind survival: up to 165 mph
    • Shock and vibration ETSI 300-19-2-4
    Regulatory Compliance
    • FCC/ISED
    • CE Marked
    • RED Directive 2014/53/EU
    • EMC Directive 2014/30/EU
    • Low Voltage Directive 2014/35/EU
    • UL/IEC/EN 60950
    • EN 60601-1-1, EN60601-1-2
    • For more country-specific regulatory information and approvals, please see your Aruba representative.
    Regulatory Model Numbers
    • AP-387: APEX0387
    Certifications
    • CB Scheme Safety, cTUVus
    • UL2043 plenum rating
    • Wi-Fi Alliance certified 802.11a/b/g/n/ac
    Minimum Operating System Software Versions
    • ArubaOS 8.4 and Aruba InstantOS 8.4
    Warranty
Aruba leads at the Edge

Aruba leads at the Edge

Gartner has once again named Aruba a Leader in the 2020 Magic Quadrant for Wired and Wireless LAN Access. On top of that, Aruba received highest scores in 6 of 6 use cases for the 2020 Gartner Critical Capabilities Report.

Ready to get started?