HPE Aruba Networking 560 Series Wi-Fi 6 Access Point

Entry-level Wi-Fi 6 (802.11ax) for outdoor and warehouse environments

Cost-effective Wi-Fi 6 outdoors

Entry-level outdoor connectivity in environmentally challenging locations. Industrial-strength surge protection. Endures extreme temperatures, persistent moisture, precipitation, airborne contaminants, dust, salt sprays, and max 165 mph wind speeds.

Ultimate efficiency

Ultimate efficiency

Supporting higher speed and higher user densities, the 560 Series APs maximize performance and efficiency with support for OFDMA and MU-MIMO technologies, enabling the most efficient communication between the client and access point.

IoT and location-ready

IoT and location-ready

HPE Aruba Networking Wi-Fi 6 supports 802.15.4/Zigbee, Bluetooth, and third party overlays to simplify the deployment and management of IoT services, asset-tracking services, security solutions, and IoT sensors. Ideal for IoT infrequent communications.

Simple and secure access

Simple and secure access

Enforces built-in policy firewall (layer 7) for each new client on the network and utilizes HPE Aruba Networking ClearPass Policy Manager for centralized policy management. For enhanced security, the 560 Series APs provide storage of credentials, keys, and booting.

Groundbreaking Wi-Fi 6 capabilities

Supports wired and wireless connectivity, in a single device, for up to 1.5 Gbps wireless throughput and 256 associated clients per radio.

1.5 Gbps maximum speed (HE80/HE20)

Delivers higher speed and reliability for environmentally challenging work and indoor environments.

Wi-Fi 6 for OFDMA and WPA3

Handles multiple clients regardless of device or traffic type, plus WPA3 and Enhanced Open increases enterprise security, plus Client Match eliminates sticky client issues.

IoT-ready Bluetooth 5 and 802.15.4/Zigbee support

Simplifies deploying and managing IoT location services, asset-tracking services, security solutions, and IoT sensors.

Dynamic Segmentation and policy-enforcement firewalls

Enforces (automatically) consistent policies across all networks, keeping users and devices secure.

AI-powered, Wi-Fi radio frequency RF with AirMatch

Utilizes AI learning, Air Match provides automated RF optimization and looks at analytics across the entire network.

Air Slice for SLA-grade performance

Guarantees a predictable user experience, prioritizing traffic and arrival of time-sensitive data with Air Slice application.

Details and Specifications for the HPE Aruba Networking 560 Series APs

Entry-level dual-band Wi-Fi 6

11ax radio supports dual-band 2x2

Integrated IoT radio

IoT radio supports 802.15.4/Zigbee and BLE

Common outdoor Access Point mount

Shares common mounting rail for simplified outdoor access point installation

1G PoE Ethernet ports with Intelligent Power Monitoring

1Gbps Ethernet with included IP66/67 gland

Details and Specifications for the HPE Aruba Networking 560 Series APs
  • Hardware Variants
    • AP-565
      • Built-in Omni Directional Antennas
      • 5 GHz Antennas 5.4 dBi
      • 2.4 GHz Antennas 3.2 dBi
      • BLE/802.15.4 Antennas 3.3d Bi
    • AP-567
      • Built-in 90°H x 90°V Directional Antennas
      • 5 GHz Antennas 6.8 dBi
      • 2.4 GHz Antennas 7.1 dBi
      • BLE/802.15.4 Antennas 3.0 dBi
    Wi-Fi Radio Specifications
    • AP type:
      • Outdoor Hardened, Wi-Fi 6 dual radio, 5 GHz 2x2 MIMO and 2.4 GHz 2x2 MIMO
    • Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
    • 5GHz:
      • Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with individual 2SS HE80 802.11ax client devices, or with two 1SS HE80 802.11ax MU-MIMO capable client devices simultaneously
    • 2.4GHz:
      • Two spatial stream Single User (SU) MIMO for up to 574 Mbps (287 Mbps) wireless data rate with individual 2SS HE40 (HE20) 802.11ax client devices or with two 1SS HE40 (HE20) 802.11ax MU-MIMO capable client devices simultaneously
    • Up to 256 associated client devices per radio
    • Up to 16 BSSIDs per radio
    • Supported frequency bands (country-specific restrictions apply):
      • 2.400 to 2.4835 GHz (ISM)
      • 5.150 to 5.250 GHz (U-NII-1)
      • 5.250 to 5.350 GHz (U-NII-2A)
      • 5.470 to 5.725 GHz (U-NII-2C)
      • 5.725 to 5.850 GHz (U-NII-3/ISM)
      • 5.850 to 5.875 GHz (U-NII-4)
    • Available channels: Dependent on configured regulatory domain
    • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
    • Supported radio technologies:
      • 802.11b: Direct-sequence spread-spectrum (DSSS)
      • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
      • 802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 16 resource units (RU)
    • Supported modulation types:
      • 802.11b: BPSK, QPSK, CCK
      • 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension)
      • 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension)
      • 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
    • 802.11n high-throughput (HT) support: HT 20/40
    • 802.11ac very high throughput (VHT) support: VHT 20/40/80
    • 802.11ax high efficiency (HE) support: HE20/40/80
    • Supported data rates (Mbps):
      • 802.11b: 1, 2, 5.5, 11
      • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
      • 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40), 400 with 256-QAM
      • 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80), 1,083 with 1024-QAM
      • 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
    • 802.11n/ac/ax Packet aggregation: A-MPDU, A-MSDU
    • Transmit power: Configurable in increments of 0.5 dBm
    • Maximum (conducted) transmit power (limited by local regulatory requirements):
      • 2.4 GHz band: +23 dBm per chain, +26 dBm aggregate (2x2)
      • 5 GHz band: +23 dBm per chain, +26 dBm aggregate (2x2)
      • Note: conducted transmit power levels exclude antenna gain.
    • Maximum EIRP (limited by local regulatory requirements):
      • 2.4 GHz band:
        • 565: 29.2 dBm EIRP
        • 567: 33 dBm EIRP
      • 5 GHz band:
        • 565: 31.4 dBm EIRP
        • 567: 32.7 dBm EIRP
    • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
    • Maximum ratio combining (MRC) for improved receiver performance
    • Cyclic delay/shift diversity (CDD/CSD) to enable the use of multiple transmit antennas
    • Short guard interval for 20-MHz, 40-MHz, and 80-MHz
    • Space-time block coding (STBC) for increased range and improved reception
    • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
    • Transmit beam-forming (TxBF) for increased signal reliability and range
    • 802.11mc Fine Timing Measurement (FTM):
      • for precision distance ranging
    • Maximum (worst-case) power consumption:
      • 15.6W
    • Maximum (worst case) power consumption in idle mode:
      • 4.2W
    • Maximum (worst case) power consumption in deep-sleep mode:
      • 1.7
    • Power sources sold separately
    • Power over Ethernet (PoE+):
      • 802.3at-compliant
    • When powered by 1x 802.3at, there are no restrictions
    • When powered by 1x 802.3af with IPM enabled, the AP will start up in unrestricted mode, but may dynamically apply restrictions depending on the POE budget and actual power. The feature restrictions can be programmed.
    • When powered by 1x 802.3af with IPM disabled, the AP will lower the 2.4Ghz radio to 1x1:1
  • Additional Interfaces
    • E0: 10/100/1000BASE-T (RJ-45)
      • Auto-sensing link speed and MDI/MDX
      • PoE-PD: 48Vdc (nominal) 802.3at/bt (Class 3 or higher)
      • 802.3az Energy Efficient Ethernet (EEE)
    • Bluetooth 5 and 802.15.4 radio
      • 2.4 GHz
      • Bluetooth 5: up to 8 dBm transmit power and -95 dBm receive sensitivity
      • Zigbee: up to 8 dBm transmit power and -97 dBm receive sensitivity
      • Up to 4 dBm transmit power (class 2) and -91 dBm receive sensitivity
    • Visual indicator (multi-color LED): For system and radio status
    • Reset button: Factory reset (during device power up)
    • USB-C console interface
    • Optional mounting kits:
      • AP-OUT-MNT-V1A: Outdoor Pole/Wall Long Mount Kit
      • AP-270-MNT-V2: Outdoor Pole/Wall Short Mount Kit
      • AP-270-MNT-H1: Outdoor AP Hanging or Tilt Install Mount Kit
      • AP-270-MNT-H2: Outdoor Flush Wall or Ceiling Mount
      • AP-270-MNT-H3: Outdoor AP Hanging or Dual-Tilt Install Mount Kit
    • AP-565
      • Dimensions/weight (excluding mount):
        • 16.5 cm (W) x 16.5 cm (D) x 11 cm (H)
        • 6.5” (W) x 6.5” (D) x 4.3” (H)
        • 1.03 kg/2.27 lbs
    • AP-567
      • Dimensions/weight (excluding mount):
        • 16.5 cm (W) x 16.5 cm (D) x 11 cm (H)
        • 6.5” (W) x 6.5” (D) x 4.3” (H)
        • 1.09 kg/2.4 lbs
    • Operating:
      • Temperature: -40° C to +55° C (-40° F to +131° F) with full solar loading
      • Humidity: 5% to 95% non-condensing internal
      • Rated for operation in all weather conditions
    • Storage and transportation:
      • Temperature: -40° C to +70° C (-40° F to +158° F)
    • Operating Altitude: 3,000 m
    • Water and Dust: IP66/67
    • Salt Tolerance: Tested to ASTM B117-07A Salt Spray 200hrs
    • Wind Survival: Up to 165 Mph
    • Shock and Vibration ETSI 300-19-2-4
    Regulatory Compliance
    • FCC/ISED
    • CE Marked
    • RED Directive 2014/53/EU
    • EMC Directive 2014/30/EU
    • Low Voltage Directive 2014/35/EU
    • IEC/EN/UL 62368-1
    • EN 60601-1-1, EN60601-1-2
    • Railway Certs:
      • EN 50155:2017 – Railway Applications
      • EN 50121-1:2017 – Railway EMC
      • EN 50121-3-2 – Railway EMC
      • EN 50121-4:2016 – Railway Immunity
      • IEC 61373 ed2:2008 – Railway Shock and Vibration
    • For more country-specific regulatory information and approvals, please see your HPE Aruba Networking representative.
    Regulatory Model Numbers
    • AP-565: APEX0565
    • AP-567: APEX0567
    • CB Scheme Safety, cTUVus
    • UL2043 plenum rating
    • Wi-Fi Alliance certified 802.11a/b/g/n/
    • Wi-Fi Alliance certified Wi-Fi 6 (802.11ax)
    • Wi-Fi CERTIFIED™ ac (with Wave 2 features)
    • Passpoint® (Release 2) with ArubaOS and Instant 8.3+
    Minimum Operating System Software Versions
    • ArubaOS and Aruba InstantOS
    • ArubaOS

Related products

Find information on HPE Aruba Networking products that complement the 560 Series APs or another solution that might better suit your needs.

Aruba 570 series outdoor access points

570 Series

High performance for extreme-density outdoor mobile and IoT deployments with dual-PoE interfaces, with a 2.5Gbps interface

  • Access Point 575 outdoor omni antennas
  • Access Point  577 outdoor directional antennas
  • Access Point 574 connectorized Access Point for external antennas
Aruba 370 series outdoor access points

370 Series

High performance Wi-Fi 5 802.11ac Wave 2 for high-density outdoor mobile with BLE support, dual-band support, and support for fiber uplink deployments

  • 375 outdoor omni antennas
  • 377 outdoor directional antennas
  • 374 outdoor connectorized access point for external antennas
Aruba 360 series access points

360 Series

Low-cost access point for outdoor and warehouse environments supporting Wi-Fi 5 802.11ac Wave 2, with dual 2x2 radios and BLE support

  • Access Point -365 outdoor omni antennas
  • Access Point - 367 outdoor directional antennas
Antennas for access points with wire extensions


To optimize coverage, learn all about our portfolio of antennas

Ready to get started?