HPE Aruba Networking 500R Series Remote Access Points
Desktop Wi-Fi 6 APs with wired connectivity—ideal for remote work and small branch offices.
Secure, reliable performance for remote work
Meet the needs of remote work with desktop APs optimized for the home office/small office with 1.49 Gbps maximum combined speed.
1.49 Gbps maximum combined speed
With 2 spatial streams, these RAPs deliver up to 1.49 Gbps to meet the needs of low and medium density environments.
Wi-Fi 6 Support
Wi-Fi 6 CERTIFIED® with support for OFDMA, MU-MIMO, and Target Wake Time to drive greater efficiency.
Two wired ports
Connect cameras, printers, and other wired devices using the two wired ports.
Cloud-native management
Zero Touch Provisioning and a single pane of glass for unified management across campus, branch, and remote work environments—with HPE Aruba Networking Central.
USB LTE modem option
Add backup cellular with a USB LTE modem.
Extensible desktop design
Includes two wired ports for device connectivity and optional cellular LTE modem—shipped with 12V adapter and localized plug.
Details and specifications for the HPE Aruba Networking 500R Series APs
Specifications
Hardware variants - AP-503R:
- Remote AP platform (desk mount, wired + wireless access), integrated antennas
Wi-Fi radio specifications - AP type:
- Indoor, dual-radio, 2.4GHz and 5GHz (dual concurrent) 802.11ax 2x2 MIMO
- 2.4GHz radio:
- Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate with 2SS HE40 802.11ax client devices (287Mbps for HE20)
- 5GHz radio:
- Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate with 2SS HE80 802.11ax client devices
- Up to 256 associated client devices per radio, and up to 16 BSSIDs per radio
- Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835GHz ISM
- 5.150 to 5.250GHz U-NII-1
- 5.250 to 5.350GHz U-NII-2A
- 5.470 to 5.725GHz U-NII-2C
- 5.725 to 5.850GHz U-NII-3/ISM
- 5.850 to 5.895GHz U-NII-4
- Available bands and channels: Dependent on configured regulatory domain (country)
- Dynamic frequency selection (DFS) optimizes the use of available RF spectrum in the 5GHz band
- Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
- 802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 8 resource units
- Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM and 256-QAM (proprietary extension)
- 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM (proprietary extension)
- 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM
- 802.11n high-throughput (HT) support:
- HT20/40
- 802.11ac very high throughput (VHT) support:
- VHT20/40/80
- 802.11ax high efficiency (HE) support::
- HE20/40/80
- Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40), 400 with 256-QAM (proprietary extension)
- 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80); 1,083 with 1024-QAM (MCS10 and MCS11, proprietary extension)
- 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
- 802.11ax (5GHz): 3.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)
- 802.11n/ac packet aggregation:
- A-MPDU, A-MSDU
- Transmit power:
- Configurable in increments of 0.5 dBm
- Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
- Per radio (2.4GHz / 5GHz): +21 dBm (18dBm per chain)
- Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain.
- Advanced Cellular Coexistence (ACC) minimizes the impact of interference from cellular networks
- Maximum ratio combining (MRC) for improved receiver performance
- Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
- Space-time block coding (STBC) for increased range and improved reception
- Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
- Transmit beam-forming (TxBF) for increased signal reliability and range
- 802.11ax Target Wait Time (TWT) to support low-power client devices
Wi-Fi antennas - AP-503R:
- Integrated omni-directional antennas for 2x2 MIMO with peak antenna gain of 3.9dBi in 2.4GHz and 5.1dBi in 5GHz. Built-in antennas are optimized for horizontal desk mounted orientation of the AP.
- Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 3.1dBi in 2.4GHz and 3.9dBi in 5GHz.
- Integrated omni-directional antennas for 2x2 MIMO with peak antenna gain of 3.9dBi in 2.4GHz and 5.1dBi in 5GHz. Built-in antennas are optimized for horizontal desk mounted orientation of the AP.
Other interfaces and features - Uplink (E0): Ethernet wired network port (RJ45)
- Auto-sensing link speed (10/100/1000BASE-T) and MDI/MDX
- 802.3az Energy Efficient Ethernet (EEE)
- Downlink (E1-E2): Ethernet wired network ports (RJ-45)
- Auto-sensing link speed (10/100/1000BASE-T) and MDI/MDX
- 802.3az Energy Efficient Ethernet (EEE)
- DC power interfaces
- Circular: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length
- USB-C: 5Vdc (nominal, +/- 5%)
- USB 2.0 host interface (Type A connector)
- Capable of sourcing up to 1A / 5W to an attached device
- Built-in Trusted Platform Module (TPM) for enhanced security and anti-counterfeiting
- Visual indicators (two multi-color LEDs): for System and Radio status
- Tapping the AP housing will toggle the LED mode between off and normal
- Reset button: factory reset, LED mode control (normal/off)
- Serial console interface (proprietary, micro-B USB physical jack)
- Kensington security slot
- Automatic thermal shutdown and recovery function
- AP-503R:
Power sources and power consumption - The AP can be powered using a compatible DC power source, connected to either one of the power interfaces (12V circular or 5V USB-C)
- The AP ships with a compatible 12V/18W DC power adapter
- Maximum (worst-case) power consumption: 15.4W
- This assumes that up to 5W is supplied to an attached USB device.
- Maximum (worst-case) power consumption without USB power sourcing is 10.0W
- Maximum (worst-case) power consumption in idle mode: 4.0W
- This assumes no power is supplied to an attached USB device or no device is attached
Mounting details - The AP is intended to be desk mounted; the integrated antennas are optimized for that. It is possible to wall mount the AP, but RF coverage and range will be compromised.
Mechanical specifications - Dimensions/weight (AP-503R; unit):
- 150mm (W) x 150mm (D) x 39mm (H)
- 320g
- Dimensions/weight (AP-503R; shipping):
- 240mm (W) x 170mm (D) x 50mm (H)
- 600g
Environmental specifications - Operating conditions
- Temperature: 0C to +40C / +32F to +104F
- Relative humidity: 5% to 95%
- ETS 300 019 class 3.2 environments
- AP is plenum rated for use in air-handling spaces
- Storage conditions
- Temperature: -25C to +55C / +13F to +131F
- Relative humidity: 10% to 100%
- ETS 300 019 class 1.2 environments
- Transportation conditions
- Temperature: -40C to +70C / -40F to +158F
- Relative humidity: up to 95%
- ETS 300 019 class 2.3 environments
Reliability - Mean Time Between Failure (MTBF): 620khrs (71yrs) at +25C ambient operating temperature
Regulatory compliance - FCC/ISED
- CE Marked
- RED Directive 2014/53/EU
- EMC Directive 2014/30/EU
- Low Voltage Directive 2014/35/EU
- UL/IEC/EN 60950
- IEC/EN 62368-1
- EN 60601-1-1, EN60601-1-2
For more country-specific regulatory information and approvals, please see your HPE Aruba Networking representative.
Regulatory model numbers - AP-503R (all models): APINR503
Certifications - Wi-Fi Alliance (WFA):
- Wi-Fi CERTIFIED a, b, g, n, ac
- Wi-Fi CERTIFIED 6
- WPA, WPA2 and WPA3 – Enterprise with CNSA option, Personal (SAE), Enhanced Open (OWE)
- WMM, WMM-PS, Wi-Fi Agile Multiband
- Passpoint (release 2)
Warranty Minimum operating system software versions - Requires HPE Aruba Networking Central 2.5.7 and ArubaOS 10.5.0.0.
- The AP can be powered using a compatible DC power source, connected to either one of the power interfaces (12V circular or 5V USB-C)
Related products
Find information on products that complement the HPE Aruba Networking 500R Series RAPs or another solution that might better suit your needs.
600R Series APs
- High-performance desktop Wi-Fi 6E remote access point
- LTE bundle for high-speed CAT 12 backup connectivity
- Ideal for power users, small branches, kiosks, and pop-ups
610 Series APs
- Compact, affordable Wi-Fi 6E campus AP
- Dual radio, tri-band architecture with to 3.6 Gbps combined peak data rate (when operating in 5 GHz and 6 GHz)
HPE Aruba Networking Central
Next-gen software that enables you to manage WLAN, switching, WAN, and VPN services using cloud, on-premises, or as-a-service options for all Aruba OS versions.