show resources
Syntax
show resources [<SLOT-ID>] [vsx-peer]Description
Shows hardware resource consumption for the specified line modules or for all line modules. Resource data is updated every 10 seconds.
TCAM entries
Policers
L4 Port Ranges
Command context
Operator (>) or Manager (#)
Parameters
<SLOT-ID>Specifies the member and slot of the line module. For example, to specify the line module in member 1, slot 2, enter
1/2.[vsx-peer]Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Examples
Showing hardware resource consumption for line module 1/1:
switch# show resources 1/1
Resource Usage:
Mod Description
Resource Width Used Reserved Free
-------------------------------------------------------------------------
1/1 Ingress IPv4 Port ACL
High-Capacity TCAM/LPM Entries 2 0 262144
MAC Control Plane Policing
TCAM Entries 2 16 256
IPv4 Control Plane Policing
TCAM Entries 2 70 256
IPv6 Control Plane Policing
TCAM Entries 2 72 *
IPv4 Unicast Route
High-Capacity TCAM/LPM Entries 1 0 131072
IPv6 Unicast Route
High-Capacity TCAM/LPM Entries 2 0 262144
IPv4 Multicast Route
High-Capacity TCAM/LPM Entries 2 0 65536
IPv6 Multicast Route
High-Capacity TCAM/LPM Entries 4 0 65536
Total
TCAM Entries 158 512 49664
High-Capacity TCAM/LPM Entries 0 786432 258048
Policers 0 65536
Ingress L4 Port Ranges 0 24
* This feature shares reserved resources with the preceding feature.