Service OS CLI login

Description

If the user enters 0 at the boot menu prompt, they will be presented with a Service OS CLI login prompt. The user must enter the login account "admin" to log in. By default, Service OS does not require a password.

To reboot without logging in, enter reboot as the login user name.

There are two additional login accounts that execute a command without requiring a password: reboot and zeroize. Enter the login account reboot to reboot the management module and zeroize to initiate a zeroization process. The zeroize user account helps a user reset the admin user account's password.

Example

ServiceOS GT.01.01.0001 switch ttyS0

To reboot without logging in, enter 'reboot' as the login user name.

switch login: admin

   Hewlett Packard
   Enterprise
SVOS>
```

```
ServiceOS GT.01.01.0001 switch ttyS0

To reboot without logging in, enter 'reboot' as the login user name.

switch login: reboot

   Hewlett Packard
   Enterprise
reboot: Restarting system
```

```
ServiceOS login: zeroize
This will securely erase all customer data, including passwords, and
reset the switch to factory defaults.
This action requires proof of physical access via a USB drive.
  * Create a FAT32 formatted USB drive
  * Create a file in the root directory of the USB drive named zeroize.txt
  * Type the following serial number into the zeroize.txt file: 772632X1830018
  * Insert the USB drive into the target module
  * Confirm the following prompt to continue

Continue (y/n)? y
############################WARNING############################
This will securely erase all customer data and reset the switch
to factory defaults. This will initiate a reboot and render the
switch unavailable until the zeroization is complete.
This should take several minutes to one hour to complete.
############################WARNING############################

Continue (y/n)? y

reboot: Restarting system