`show images`

Syntax

show images [vsx-peer]

Description

Shows information about the software in the primary and secondary images.

Command context

Operator (>) or Manager (#)

Parameters

[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

Showing the primary and secondary images on a 6200 switch:

switch(config)# show images
---------------------------------------------------------------------------
ArubaOS-CX Primary Image
---------------------------------------------------------------------------
Version : ML.10.06.0001AAE-54-g89a7618  
Size    : 446 MB                        
Date    : 2020-04-27 16:50:39 PDT       
SHA-256 : 2e6261e26591f9a6b94be28b0890de521f0869a9dbc378659fc33d7c40fd12fc    

---------------------------------------------------------------------------
ArubaOS-CX Secondary Image
---------------------------------------------------------------------------
Version : ML.10.06.0001AAE-54-g89a7618  
Size    : 446 MB                        
Date    : 2020-04-27 16:50:39 PDT       
SHA-256 : 2e6261e26591f9a6b94be28b0890de521f0869a9dbc378659fc33d7c40fd12fc    

Default Image : primary                       

------------------------------------------------------
Management Module 1/1 (Active)
------------------------------------------------------
Active Image       : primary                       
Service OS Version : ML.01.05.0001-internal        
BIOS Version       : FL.01.0003