copy diag-dump local-file
Syntax
copy diag-dump local-file {<REMOTE-URL> [vrf <VRF-NAME>] | <STORAGE-URL>}
Description
Copies the diagnostic information stored in a local file using TFTP, SFTP, or USB.
Command context
Manager (#
)
Parameters
{<REMOTE-URL> [vrf <VRF-NAME>] |<STORAGE-URL>}
Select either the storage URL or the remote URL for the destination of the copied command output. Required.
<REMOTE-URL>
Specifies the URL to copy the command output.
Syntax:
{tftp:// | sftp://<USER>@}{<IP> | <HOST>}[:<PORT>][;blocksize=<VAL>]/<FILE>
vrf <VRF-NAME>
Specifies the VRF name. The default VRF name is default. Optional.
<STORAGE-URL>
Specifies the USB to copy command output.
Syntax:
{usb}:/<FILE>
Authority
Administrators or local user group members with execution rights for this command.
Usage
The
copy diag-dump local-file
command can be used only after the information is captured. Run the
diag-dump
<FEATURE-NAME> basic local-file
command before you enter the
copy diag-dump local-file
command to capture the diagnostic information for the specified feature into the local file.
Examples
Copying the output from the local file to a remote URL:
switch# diag-dump aaa basic local-file switch# copy diag-dump local-file tftp://10.100.0.12/diagdump.txt
Copying the output from the local file to a USB drive:
switch# diag-dump aaa basic local-file switch# copy diag-dump local-file usb:/diagdump.txt