show system

Description

Shows general status information about the system.

Command context

Operator (>) or Manager (#)

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Usage

CPU utilization represents the average utilization across all the CPU cores.

System Contact, System Location, and System Description can be set with the snmp-server command.

Examples

Showing system information for the VSX primary and secondary (peer) switch on an 8320:

vsx-primary# show system
Hostname           : vsx-primary
System Description : TL.10.xx.xxxxx
System Contact     :
System Location    :

Vendor             : Aruba
Product Name       : JL479A 8320
Chassis Serial Nbr : TW82K7200Q
Base MAC Address   : 98f2b3-68792e
ArubaOS-CX Version : TL.10.xx.xxxxx

Time Zone          : UTC

Up Time            : 19 hours, 51 minutes
CPU Util (%)       : 50
Memory Usage (%)   : 36

vsx-primary# show system vsx-peer
Hostname           : vsx-secondary
System Description : TL.10.xx.xxxxx
System Contact     :
System Location    :

Vendor             : Aruba
Product Name       : JL479A 8320
Chassis Serial Nbr : TW73JQH024
Base MAC Address   : e0071b-cb72e4
ArubaOS-CX Version : TL.10.xx.xxxxx

Time Zone          : UTC

Up Time            : 21 hours, 23 minutes
CPU Util (%)       : 14
Memory Usage (%)   : 36