show core-dump
Syntax
show core-dump [all | <SLOT-ID>]
Description
Shows core dump information about the specified module. When no parameters are specified, shows only the core dumps generated in the current boot of the management module. When the
all
parameter is specified, shows all available core dumps.
Command context
Manager (#
)
Parameters
all
Shows all available core dumps.
<SLOT-ID>
Shows the core dumps for the management module or line module in
<SLOT-ID>
.<SLOT-ID>
specifies a physical location on the switch. Use the formatmember/slot/port
(for example,1/3/1
) for line modules. Use the formatmember/slot
for management modules.You must specify the slot ID for either the active management module, or the line module.
Authority
Administrators or local user group members with execution rights for this command.
Usage
When no parameters are specified, the
show core-dump
command shows only the core dumps generated in the current boot of the management module. You can use this command to determine when any crashes are occurring in the current boot.
If no core dumps have occurred, the following message is displayed:
No core dumps are present
To show core dump information for the standby management module, you must use the
standby
command to switch to the standby management module and then execute the
show core-dump
command.
In the output, the meaning of the information is the following:
Daemon Name
Identifies name of the daemon for which there is dump information.
Instance ID
Identifies the specific instance of the daemon shown in the
Daemon Name
column.Present
Indicates the status of the core dump:
Yes
The core dump has completed and available for copying.
In Progress
Core dump generation is in progress. Do not attempt to copy this core dump.
Timestamp
Indicates the time the daemon crash occurred. The time is the local time using the time zone configured on the switch.
Build ID
Identifies additional information about the software image associated with the daemon.
Examples
Showing core dump information for the current boot of the active management module only:
switch# show core-dump ================================================================================== Daemon Name | Instance ID | Present | Timestamp | Build ID ================================================================================== hpe-fand 1399 Yes 2017-08-04 19:05:34 1246d2a hpe-sysmond 957 Yes 2017-08-04 19:05:29 1246d2a ================================================================================== Total number of core dumps : 2 ==================================================================================
Showing all core dumps:
switch# show core-dump all ============================================================================= Management Module core-dumps ============================================================================= Daemon Name | Instance ID | Present | Timestamp | Build ID ============================================================================= hpe-sysmond 513 Yes 2017-07-31 13:58:05 e70f101 hpe-tempd 1048 Yes 2017-08-13 13:31:53 e70f101 hpe-tempd 1052 Yes 2017-08-13 13:41:44 e70f101 Line Module core-dumps ============================================================================= Line Module : 1/1 ============================================================================= dune_agent_0 18958 Yes 2017-08-12 11:50:17 e70f101 dune_agent_0 18842 Yes 2017-08-12 11:50:09 e70f101 ============================================================================= Total number of core dumps : 5 =============================================================================