show bluetooth

Syntax

show bluetooth

Description

Shows general status information about the Bluetooth wireless management feature on the switch.

Command context

Operator (>) or Manager (#)

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Usage

This command shows status information about the following:

  • The USB Bluetooth adapter

  • Clients connected using Bluetooth

  • The switch Bluetooth feature.

The output of the show running-config command includes Bluetooth information only if the Bluetooth feature is disabled.

The device name given to the switch includes the switch serial number to uniquely identify the switch while pairing with a mobile device.

The management IP address is a private network address created for managing the switch through a Bluetooth connection.

Examples

Example output when Bluetooth is enabled but no Bluetooth adapter is connected. <XXXX> is the switch platform and <NNNNNNNNNN> is the device identifier. 

switch# show bluetooth
Enabled             : Yes
Device name         : <XXXX>-<NNNNNNNNNN>
Adapter State       : Absent

Example output when Bluetooth is enabled and there is a Bluetooth adapter connected: 

switch# show bluetooth
Enabled             : Yes
Device name         : <XXXX>-<NNNNNNNNNN>
Adapter State       : Ready
Adapter IP address  : 192.168.99.1
Adapter MAC address : 480fcf-af153a

Connected Clients
-----------------
Name            MAC Address     IP Address    Connected Since
--------------  --------------  ------------  ------------------------
Mark's iPhone   089734-b12000   192.168.99.10  2018-07-09 08:47:22 PDT

Example output when Bluetooth is disabled: 

switch# show bluetooth
Enabled             : No
Device name         : <XXXX>-<NNNNNNNNNN>