module admin-state

Description

Sets the administrative state of the specified line module.

Command context

config

Parameters

<SLOT-ID>

Specifies the member and slot of the module. For example, to specify the module in member 1, slot 3, enter the following:

1/3

admin-state {diagnostic | down | up}

Selects the administrative state in which to put the specified module:

diagnostic

Selects the diagnostic administrative state. Network traffic does not pass through the module.

down

Selects the down administrative state. Network traffic does not pass through the module.

up

Selects the up administrative state. The line module is fully operational. The up state is the default administrative state.

Authority

Administrators or local user group members with execution rights for this command.

Example

Setting the administrative state of the module in slot 1/3 to down:

switch(config)# module 1/3 admin-state down