show ipv6 interface
Syntax
show ipv6 interface <INTERFACE-ID> [vsx-peer]
Description
Shows status and configuration information for an IPv6 interface.
Command context
Manager (#)
Parameters
<INTERFACE-ID>
Specifies an interface ID. Format:
member/slot/port
.[vsx-peer]
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Examples
On the 6400 Switch Series, interface identification differs.
switch# show ipv6 interface 1/1/1 Interface 1/1/1 is up Admin state is up IPv6 address: 2001:0db8:85a3:0000:0000:8a2e:0370:7334/24 [VALID] IPv6 link-local address: fe80::1e98:ecff:fee3:e800/64 (default)[VALID] IPv6 virtual address configured: none IPv6 multicast routing: disable IPv6 Forwarding feature: enabled IPv6 multicast groups locally joined: ff02::ff70:7334 ff02::ffe3:e800 ff02::1 ff02::1:ff00:0 ff02::2 IPv6 multicast (S,G) entries joined: none IPv6 MTU: 1524 (using link MTU) IPv6 unicast reverse path forwarding: none IPv6 load sharing: none RX 0 packets, 0 bytes TX 0 packets, 0 bytes