show ipv6 source-interface
Syntax
show ipv6 source-interface {sflow | tftp | radius | tacacs | all}
[vrf <VRF-NAME>] [vsx-peer]
Description
Shows single source IP address configuration settings.
Command context
Manager (#)
Parameters
sflow | tftp | radius | tacacs | all
Shows single source IP address configuration settings for a specific protocol. The
all
option shows the global setting that applies to all protocols that do not have an address set.vrf <VRF-NAME>
Specifies the name of a VRF.
[vsx-peer]
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.
Authority
Administrators or local user group members with execution rights for this command.
Examples
On the 6400 Switch Series, interface identification differs.
Showing single source IP address configuration settings for sFlow:
switch# show ipv6 source-interface sflow Source-interface Configuration Information ---------------------------------------- Protocol Source Interface -------- ---------------- sflow 2001:DB8::1
Showing single source IP address configuration settings for all protocols:
switch# show ipv6 source-interface all Source-interface Configuration Information ---------------------------------------- Protocol Source Interface -------- ---------------- all 1/1/1