show cdp neighbor-info

Syntax

show cdp neighbor-info <INTERFACE-ID>

Description

Shows CDP information for all neighbors or for CDP information on a specific interface.

Command context

config

Parameters

<INTERFACE-ID>

Specifies an interface. Format: member/slot/port.

Authority

Administrators or local user group members with execution rights for this command.

Examples

On the 6400 Switch Series, interface identification differs.

Showing all CDP neighbor information:

switch(config)# show cdp neighbor-info
Port        Device ID                Platform                 Capability
-------------------------------------------------------------------------------
1/1/1       myswitch                 cisco WS-C2950-12        SI

Showing CDP information for interface 1/1/1:

switch(config)# show cdp neighbor-info 1/1/1
Local Port : 1/1/1
MAC                : 3c:a8:2a:7b:6b:2b
Device ID          : SEPd4adbd2a30d6
Address            : 2.71.0.230
Platform           : Cisco IP Phone 3905
Duplex             : full
Capability         : host
Voice VLAN Support : Yes
Neighbor Port-ID   : Port 1