show environment led


show environment led [vsf <MEMBER-ID>| vsx-peer]


Shows state and status information for all the configurable LEDs in the system.

Command context

Operator (>) or Manager (#)



Shows output from the specified VSF member-id on switches that support VSF.


Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.


Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.


Showing state and status for LED for 6300 or 6400 switch series:

switch# show environment led
Mbr/Name       State     Status
1/locator      off       ok