show port-access device-profile

Syntax

show port-access device-profile [[interface {all | <INTERFACE-ID>} 
     [client-status <MAC-ADDR>]] | name <DEVICE-PROFILE-NAME>]

Description

Shows the client status for a specific MAC address or profile name.

Command context

Manager (#)

Parameters

interface {all | <INTERFACE-ID>}
Select all for all interfaces or specify the name of an interface in the format: member/slot/port.
client-status <MAC-ADDR>
Specifies a MAC address (xx:xx:xx:xx:xx:xx), where x is a hexadecimal number from 0 to F.
name <DEVICE-PROFILE-NAME>
Specifies the name of the device profile.

Authority

Administrators or local user group members with execution rights for this command.

Examples

On the 6400 Switch Series, interface identification differs.

Showing the applied state of the device profiles:

switch# show port-access device-profile

    Profile Name    : accesspoints
    LLDP Groups     : 2920-grp
    CDP Groups      :
    MAC Groups      : 2920-mac-grp1,2920-iot-grp2
    Role            : local_role_1
    State           : Enabled

    Profile Name    : access_switches
    LLDP Groups     : 2920-grp
    CDP Groups      : 
    MAC Groups      :
    Role            : local_2920_role
    State           : Enabled

    Profile Name    : iot_devices
    LLDP Groups     : 
    CDP Groups      : 
    MAC Groups      : iot_camera-grp1,iot_sensors-grp1
    Role            : local_2920_role
    State           : Enabled

    Profile Name    : lobbyaps
    LLDP Groups     :
    CDP Groups      : lobby_ap_cdp_grp
    MAC Groups      :
    Role            : test_ap_role
    State           : Disabled

Showing the applied state of the device profile on interface 1/1/3:

switch# show port-access device-profile interface 1/1/3 client-status 00:0c:29:9e:d1:20

Port 1/1/3, Neighbor-Mac  00:0c:29:9e:d1:20
    Profile Name    : lobbyaps
    LLDP Group      :
    CDP Group       : aruba-ap_cdp
    MAC Group       :
    Role            : test_ap_role
    Status          : Failed
    Failure Reason  : Failed to apply MAC based VLAN

Showing the applied state of a specific device profile:

switch# show port-access device-profile name lldp-group

    Profile Name            : lldp-group
    LLDP Groups             :
    CDP Groups              :
    MAC Groups              : pc-behind-phone, lldp
    Role                    : auth_role
    State                   : Enabled