Editing an interface

Use this procedure to perform the following tasks:

  • Add an interface description

  • Set the interface speed

  • Set admin status

  • Set flow control status

  • Split interface

Procedure
  1. In the navigation pane, select Interfaces.

    The Interfaces page is displayed.

  2. In the Interfaces panel, select an interface, and click .

    The Configure Interface dialog box is displayed for the selected interface. You can select a different interface if required.

  3. Enter a description for the interface. For example, Guest connection.
  4. You can select one of the following values for the interface speed.

    • 10-full

    • 10-half

    • 100-full

    • 100-half

    • auto

  5. Select Up or Down for the Admin Status.
  6. Select Enable or Disable for the Flow Control Status.
    NOTE:

    Only the Web UI for 6400 (SKU: ROX45A LC) switch has an additional setting called Split for the 40 Gb/s ports. Splitting a port disables the selected port, clears all port configuration, and splits the port into multiple interfaces. The split interfaces are not available until you reboot the switch or the module. For example, select the 40 Gb/s port, and select the Split checkbox to split the port into four 10 Gb/s interfaces.

  7. Click Update.