show arp timeout

Description

Shows the age-out period for each ARP (Address Resolution Protocol) entry for a port, LAG, or VLAN interface.

Command context

Operator (>) or Manager (#)

Parameters

<INTERFACE>

Specifies a physical port, VLAN, or LAG on the switch. For physical ports, use the format member/slot/port (for example, 1/3/1).

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

Showing ARP timeout information for a VLAN:

switch# show arp timeout vlan4

Showing ARP timeout information for a port:

switch# show arp timeout 1/1/1
ARP Timeout:

------------------

Port             VRF                              Timeout

1/1/1            default                          600