show fabric

Syntax

show fabric [<SLOT-ID>] [vsx-peer]

Description

Shows information about the installed fabrics.

Command context

Operator (>) or Manager (#)

Parameters

<SLOT-ID>

Specifies the member and slot of the fabric to show. For example, to show the module in member 1, slot 2, enter the following:

1/2

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

Showing all fabrics:

switch# show fabric

Fabric Modules
==============

     Product                                    Serial
Slot Number  Description                        Number     Status
---- ------- ---------------------------------- ---------- ------
1/1  JL367A  8400X 7.2Tbps Fab Mod              SG00000000 Ready
1/2  JL367A  8400X 7.2Tbps Fab Mod              SG00000000 Initializing
1/3  JL367A  8400X 7.2Tbps Fab Mod              SG00000000 Initializing

Showing a single fabric:

switch# show fabric 1/1

Fabric module 1/1 is ready
Admin state: Up
Description: 8400X 7.2Tbps Fab Mod
Full Description: Aruba 8400X 7.2Tbps Fabric Module
Serial number: SG00000000
Product number: JL367A