show ip pim


show ip pim [all-vrfs | vrf <VRF-NAME>] [vsx-peer]


Shows the PIM router information. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.

Command context

Operator (>) or Manager (#)



Shows PIM router information on all VRFs.

vrf <VRF-NAME>

Specify the name of a VRF. Default: default.


Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.


Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.


Showing IP PIM router:

switch# show ip pim

PIM Global Parameters

VRF                          :  default
PIM Status                   :  enable
SPT Threshold                :  enabled