show ip pim neighbor


show ip pim neighbor [<IP-ADDR>] 
     [all-vrfs | vrf <VRF-NAME>] [vsx-peer]


Shows PIM neighbor information. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.



Selects all VRFs.

vrf <VRF-NAME>

Specifies the name of a VRF. Default: default.


Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.


Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.


Showing PIM neighbor information:

switch# show ip pim neighbor

PIM Neighbor

VRF                 : default
IP Address          :
Interface           : 1/1/1
Up Time (sec)       : 544
Expire Time (sec)   : 80
DR Priority         : 40