show ipv6 pim6 neighbor


show ipv6 pim6 neighbor [<IPv6-ADDR>] 
     [all-vrfs | vrf <VRF-NAME>] [vsx-peer]


Shows PIM neighbor information. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.



Specifies a neighbor address in IPv6 format (xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx), where x is a hexadecimal number from 0 to F.


Shows information for all VRFs.

vrf <VRF-NAME>

Specifies the name of a VRF. Default: default.


Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.


Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.


On the 6400 Switch Series, interface identification differs.

Showing PIM neighbor information:

switch# show ipv6 pim6 neighbor

PIM Neighbor

VRF                 : default
IP Address          : 2001::02
Interface           : 1/1/1
Up Time (sec)       : 0
Expire Time (sec)   : 0
DR Priority         : 44