rp-candidate priority
Syntax
rp-candidate priority <PRIORITY-VALUE>
no rp-candidate priority
Description
Changes the current priority setting for a C-RP. Where multiple C-RP configurations are used to support the same multicast groups, the candidate having the highest priority is elected. Zero (0) is the highest priority, and 255 is the lowest priority.
The
no
form of this command removes the currently configured value and sets it to the default of 192.
Command context
config-pim
Parameters
<PRIORITY-VALUE>
Specifies the priority value for the Candidate-RP router. Range: 0 to 255. Default: 192.
Authority
Administrators or local user group members with execution rights for this command.
Example
Configuring and removing candidate priority:
switch(config)# router pim switch(config-pim)# rp-candidate priority 250 switch(config-pim)# no rp-candidate priority