show ipv6 pim6 interface <INTERFACE-NAME>


show ipv6 pim6 interface <INTERFACE-NAME> [vsx-peer]


Shows detailed information about the PIM interface currently configured.

Command context

Operator (>) or Manager (#)



Specifies an interface for showing PIM interface information. Interface can also be a LAG or VLAN.


Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.


Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.


Showing PIM interface information for interface 1/1/1:

switch# show ipv6 pim6 interface 1/1/1

PIM Interfaces

VRF: default

Interface             : 1/1/1
IPv6 Address          : fe80::a00:9ff:feec:dc0e/64
Mode                  : dense

Designated Router     : fe80::a00:9ff:febd:8364
Hello Interval        : 30 sec
Hello Delay           : 4 sec

Override Interval     : 500 msec               LAN Prune Delay     : Yes
Propagation Delay     : 350 msec               DR Priority         : 3
Neighbor Timeout      : 0                      TTL Threshold       : 250
Graft Retry Interval  : 9                      Max Graft Retries   : 9