ERPS events
The following are the events related to ERPS.
Event ID: 8501 (Severity: Warning)
|
Message |
Expected R-APS packets not received on <ifID> in ring <ringID> with control VLAN <ccvlan> |
|
Category |
ERPS |
|
Severity |
Warning |
|
Description |
Log event when RAPS messages are not received for a certain time interval |
Event ID: 8502 (Severity: Warning)
|
Message |
Misconfiguration detected on ring <ringID> with control VLAN <ccvlan>. Another node in the ring with mac <node> is also operating as an RPL owner |
|
Category |
ERPS |
|
Severity |
Warning |
|
Description |
Log event when a ring misconfiguration happens |
Event ID: 8503
|
Message |
Operational state of the ring <ringID>, instance <instanceID> changed to <state> |
|
Category |
ERPS |
|
Severity |
Information |
|
Description |
Log state transition of ring instance |
Event ID: 8504
|
Message |
<interfaceName> is not an L2 port |
|
Category |
ERPS |
|
Severity |
Information |
|
Description |
Log event when ring is configured with a non-L2 port |
Event ID: 8505
|
Message |
<interfaceName> is already associated with <portName> of ERPS ring <ringID> |
|
Category |
ERPS |
|
Severity |
Information |
|
Description |
Log event when an interface which is already associated to a ring port is getting mapped to other ring port as well |
Event ID: 8506
|
Message |
Configured control-channel VLAN <ccVlan> is already protected by ERPS ring <ringID>, instance <instanceID> |
|
Category |
ERPS |
|
Severity |
Information |
|
Description |
Log event when control-channel VLAN is part of the protected-vlans |
Event ID: 8507
|
Message |
VLAN <ccVlan> is already configured as control-channel for instance <instanceID> of ring <ringID> |
|
Category |
ERPS |
|
Severity |
Information |
|
Description |
Log event when control-channel VLAN overlaps with another control-channel of same ring |
Event ID: 8508
|
Message |
Vlan <dataVlan> is already part of the protected VLAN set of ring <ringID> instance <instanceID> |
|
Category |
ERPS |
|
Severity |
Information |
|
Description |
Log event when protected-vlan(s) overlap |
Event ID: 8509
|
Message |
Control VLAN must not be same on parent and sub rings |
|
Category |
ERPS |
|
Severity |
Information |
|
Description |
Log event when same control-channel VLAN is configured on both major and sub-rings |
Event ID: 8510
|
Message |
Parent-ring <ringID> is same as sub-ring |
|
Category |
ERPS |
|
Severity |
Information |
|
Description |
Log event when parent-ring id is configured to be the same as sub-ring |
Event ID: 8511
|
Message |
VLAN <vlanID> in the protected VLANs list is also configured as the control-channel |
|
Category |
ERPS |
|
Severity |
Information |
|
Description |
Log event when VLAN from the protected-vlans list is already configured as control-channel VLAN |
Event ID: 8512
|
Message |
<portName> is already configured as RPL port for instance <instanceID> |
|
Category |
ERPS |
|
Severity |
Information |
|
Description |
Log event if the same ring port is configured as RPL port for more than one instance |
Event ID: 8513
|
Message |
RPL configuration is not allowed on ISL port <interfaceName> |
|
Category |
ERPS |
|
Severity |
Information |
|
Description |
Log event if ring port which is also an ISL is being configured as RPL |
Event ID: 8514
|
Message |
Protected VLAN set of instance in sub-ring should map to same instance in the parent ring |
|
Category |
ERPS |
|
Severity |
Information |
|
Description |
Log event if protected-vlan set of sub-ring is not a subset of the major-ring |
Event ID: 8515
|
Message |
Operational state of the ring <ringID>, instance <instanceID> changed to Initializing with reason <reason> |
|
Category |
ERPS |
|
Severity |
Information |
|
Description |
Log transition of state of ring instance to initializing and the reason for it |
