Fan events
The following are the events related to fan.
Event ID: 201
|
Message |
There are <count> total fans in subsystem <subsystem>. |
|
Category |
Fan |
|
Severity |
Information |
|
Description |
Log the total number of fans in the subsystem |
Event ID: 202
|
Message |
Subsystem <subsystem> setting fan speed control register to <speedval>: <value>. |
|
Category |
Fan |
|
Severity |
Information |
|
Description |
Log the fan speed set |
Event ID: 203
|
Message |
Air flow direction: <value>. |
|
Category |
Fan |
|
Severity |
Information |
|
Description |
Log the air flow direction |
Event ID: 204 (Severity: Warning)
|
Message |
Fan tray <FT_Num> was removed. |
|
Category |
Fan |
|
Severity |
Warning |
|
Description |
Log event when a fan tray is removed from the chassis |
Event ID: 205
|
Message |
Fan tray <FT_Num> was inserted. |
|
Category |
Fan |
|
Severity |
Information |
|
Description |
Log event when a fan tray is inserted into the chassis |
Event ID: 206
|
Message |
Fan module <FMod_Num> in fan tray <FT_Num> was removed. |
|
Category |
Fan |
|
Severity |
Information |
|
Description |
Log event when a fan module is removed from a fan tray |
Event ID: 207
|
Message |
Fan module <FMod_Num> in fan tray <FT_Num> was inserted. |
|
Category |
Fan |
|
Severity |
Information |
|
Description |
Log event when a fan module is inserted into a fan tray |
Event ID: 208
|
Message |
Unsupported fan tray <FT_Num> detected. Please insert a standard fan tray. |
|
Category |
Fan |
|
Severity |
Error |
|
Description |
Log event when an unsupported fan tray is inserted |
Event ID: 209
|
Message |
Shutting down system now because <num_of_failure> <failure_type> <compare_mode> limit of <num_of_failure_limit>': yes |
|
Category |
Fan |
|
Severity |
Error |
|
Description |
Log error when system shutdown is initiated due to critical fan faults |
Event ID: 211 (Severity: Warning)
|
Message |
Shutting down system in <seconds> seconds because <num_of_failure> <failure_type> <compare_mode> limit of <num_of_failure_limit> |
|
Category |
Fan |
|
Severity |
Warning |
|
Description |
Log error when the number of failures exceed the allowable limit |
Event ID: 212 (Severity: Warning)
|
Message |
System shutdown timer is cancelled.': yes |
|
Category |
Fan |
|
Severity |
Warning |
|
Description |
Log event when the shutdown timer is cancelled |
Event ID: 213
|
Message |
<num_of_failure> <failure_type> in the system.': yes |
|
Category |
Fan |
|
Severity |
Error |
|
Description |
Log error when there are fan faults |
Event ID: 214
|
Message |
<function>: Fan fault in tray <tray_index>, module <fan_index>, reason: <reason>.': yes |
|
Category |
Fan |
|
Severity |
Error |
|
Description |
List out the faulty or missing fan names |
Event ID: 215
|
Message |
<FanName> fan is <FanStatus>. |
|
Category |
Fan |
|
Severity |
Information |
|
Description |
Log the fan status |
Event ID: 216
|
Message |
Status of fan <FanModuleIdx> in tray <FanTrayIdx> has changed from <OldStatus> to <NewStatus>. |
|
Category |
Fan |
|
Severity |
Information |
|
Description |
Log the change in fan status |
Event ID: 217 (Severity: Warning)
|
Message |
Operational fan count below minimum. <FanCount> fans operating, but <FanMinimum> are required. |
|
Category |
Fan |
|
Severity |
Warning |
|
Description |
Log when minimum number of fans are not present. |
Event ID: 218
|
Message |
Fan speed index for thermal zone <ZoneIdx> is <FanSpdIdxStatus>. |
|
Category |
Fan |
|
Severity |
Information |
|
Description |
Log when the fan speed index changes to and from the maximum for each thermal zone |
Event ID: 219
|
Message |
Fan tray <FT_Num> powered <Status>. |
|
Category |
Fan |
|
Severity |
Information |
|
Description |
Log event when a fan tray is powered on or off |
Event ID: 220
|
Message |
Fan tray <FT_Num> airflow is <FT_Dir>. |
|
Category |
Fan |
|
Severity |
Information |
|
Description |
Log event when a fan tray is inserted specifying its airflow direction |
Event ID: 221 (Severity: Warning)
|
Message |
<FT_air_curr> airflow fan tray <FT_Num> unsupported; this system requires <FT_air_req> airflow. |
|
Category |
Fan |
|
Severity |
Warning |
|
Description |
Log event when a fan tray airflow is not matching with system airflow |
Event ID: 222
|
Message |
<num_of_failure> <failure_type> <compare_mode> limit of <num_of_failure_limit>': yes |
|
Category |
Fan |
|
Severity |
Error |
|
Description |
Log error when number of faulty/supported fans does not meet the allowable limit |
Event ID: 223 (Severity: Warning)
|
Message |
Fan tray <FT_Num> FRU EPPROM is incorrectly programmed. |
|
Category |
Fan |
|
Severity |
Warning |
|
Description |
Log when fan tray SKU ID in FRU is mismatched |
Event ID: 224 (Severity: Warning)
|
Message |
<FT_air_curr> airflow fan tray <FT_Num> disabled; this system requires <FT_air_req> airflow. |
|
Category |
Fan |
|
Severity |
Warning |
|
Description |
Log event when a fan tray airflow is not matching with system airflow and is disabled |
Event ID: 225 (Severity: Warning)
|
Message |
fan tray <FT_Num> misconfigured; this fan tray has been <En_Dis>. |
|
Category |
Fan |
|
Severity |
Warning |
|
Description |
Log event when a misconfigured fan tray is enabled or disabled |
