MGMD events
The following are the events related to MGMD.
Event ID: 2601 (Severity: Fatal)
|
Message |
Failed to alloc a <pkt_type> pkt(interface <vlan>) |
|
Category |
MGMD |
|
Severity |
Fatal |
|
Description |
This log event informs packet allocation failed in MGMD subsystem. |
Event ID: 2602
|
Message |
Received IGMPv1 query from <ip_address> when the device is configured for IGMPv2. |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event used to log IGMP warning when IGMPv1 query is received. |
Event ID: 2603 (Severity: Fatal)
|
Message |
Unable to alloc a buf of size <size_value> for <sub_system> |
|
Category |
MGMD |
|
Severity |
Fatal |
|
Description |
This log event informs the user that MGMD could not allocate memory. |
Event ID: 2604
|
Message |
Interface <if_name>: Other Querier detected for <mgmd_type> |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event informs the user that IGMP/MLD detected other querier. |
Event ID: 2605
|
Message |
<mgmd_type> Querier Election in progress for interface <if_name> with IP address <ip_address> |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event informs the user that IGMP/MLD has started querier election on interface. |
Event ID: 2606
|
Message |
Interface <if_name>: End <mgmd_type> Querier role |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event informs the user that IGMP/MLD ended querier role on interface. |
Event ID: 2607
|
Message |
Interface <if_name>: Start <mgmd_type> Querier role addr: <ip_address> |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event informs the user that MGMD started querier role on interface. |
Event ID: 2608 (Severity: Warning)
|
Message |
Received packet from <ip_address>, type <type>, on invalid port <port> |
|
Category |
MGMD |
|
Severity |
Warning |
|
Description |
This log event informs the user that MGMD received packet on invalid port. |
Event ID: 2609
|
Message |
Received IGMPv1 query from <ip_address> when the device is configured for IGMPv3.' throttle_count: 1 |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event used to log IGMP warning when configured mode is IGMPv3 and IGMPv1 query is received. |
Event ID: 2610
|
Message |
Received IGMPv2 query from <ip_address> when the device is configured for IGMPv3.' throttle_count: 1 |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event used to log IGMP warning when configured mode is IGMPv3 and IGMPv2 query is received. |
Event ID: 2611
|
Message |
<mgmd_type> snooping is <status> on VLAN <vlan> |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event informs the user that IGMP/MLD status on VLAN. |
Event ID: 2612
|
Message |
<mgmd_type> is <status> on Interface <if_name> |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event informs the user the IGMP/MLD status on the Interface. |
Event ID: 2613
|
Message |
Port <port> on vlan <vlan> is set to <status> mode for <mgmd_type>. |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event informs the user that the port mode has changed. |
Event ID: 2614
|
Message |
<mgmd_type> is not operational on VLAN <vlan> due to resource unavailability |
|
Category |
MGMD |
|
Severity |
Error |
|
Description |
This log event informs the user that the IGMP/MLD is disabled on a VLAN due to internal errors. |
Event ID: 2615
|
Message |
<mgmd_type> is not operational on interface <l3Port> due to resource unavailability |
|
Category |
MGMD |
|
Severity |
Error |
|
Description |
This log event informs the user that the IGMP/MLD is disabled on a L3 interface due to internal errors. |
Event ID: 2616
|
Message |
IGMP/MLD Resource utilization has exceeded the supported limits on the system. Membership reports for the new groups will be dropped. |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event informs the user that MGMD resource utilization has exceeded the supported limits |
Event ID: 2617
|
Message |
IGMP/MLD Resource utilization has reached 90 percent of the supported limits on the system. |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event informs the user that MGMD resource utilization has reached 90 percent of the supported limits |
Event ID: 2618
|
Message |
<mgmd_type> snooping is <status> on VLAN <vlan>. |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event informs the user that whether IGMP/MLD snooping is operational. |
Event ID: 2619
|
Message |
Received IGMPv3 query from <ip_address> when the device is configured for IGMPv2.' throttle_count: 1 |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event used to log IGMP warning when IGMPv2 query is received. |
Event ID: 2620
|
Message |
Received MLDV1 query from <ip_address> when the device is configured for MLDV2.' throttle_count: 1 |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event used to log MLD warning when configured mode is MLDV2 and MLDV1 query is received. |
Event ID: 2621
|
Message |
Received MLDV2 query from <ip_address> when the device is configured for MLDV1.' throttle_count: 1 |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event used to log MLD warning when configured mode is MLDv2 and MLDv1 query is received. |
Event ID: 2622
|
Message |
Flood mode is temporarily activated on ERPS ports <port0> and <port1> as ring state for ring id <ring_id> changed to <state>. |
|
Category |
MGMD |
|
Severity |
Information |
|
Description |
This log event used to log if ERPS Ring state changed to idle or protection. |
