Rapid per VLAN Spanning Tree Protocol events
The following are the events related to rapid per VLAN spanning tree protocol.
Event ID: 5001
|
Message |
RPVST Enabled |
|
Category |
Rapid per VLAN Spanning Tree Protocol |
|
Severity |
Information |
|
Description |
This log event indicates that RPVST has been enabled on the switch. |
Event ID: 5002
|
Message |
RPVST Disabled |
|
Category |
Rapid per VLAN Spanning Tree Protocol |
|
Severity |
Information |
|
Description |
This log event indicates that RPVST has been disabled on the switch. |
Event ID: 5003
|
Message |
RPVST - Root changed from <old_priority>: <old_mac> to <new_priority>: <new_mac> on VLAN <vlan>. |
|
Category |
Rapid per VLAN Spanning Tree Protocol |
|
Severity |
Information |
|
Description |
This log event indicates that RPVST root on a VLAN has changed |
Event ID: 5004 (Severity: Warning)
|
Message |
Port <port> disabled - BPDU received on protected port on VLAN <vlan>. |
|
Category |
Rapid per VLAN Spanning Tree Protocol |
|
Severity |
Warning |
|
Description |
This log event informs the user BPDU received on protected port |
Event ID: 5005
|
Message |
<proto> starved for <pkt_type> on port <port> from <priority_mac> on VLAN <vlan>. |
|
Category |
Rapid per VLAN Spanning Tree Protocol |
|
Severity |
Information |
|
Description |
This log event informs the user that the Rx is starved in paticular port |
Event ID: 5006
|
Message |
Topology change received on port <port> from source: <mac> on VLAN <vlan>. |
|
Category |
Rapid per VLAN Spanning Tree Protocol |
|
Severity |
Information |
|
Description |
This log event informs the user that the RPVST topology change is received |
Event ID: 5007
|
Message |
Topology change generated on port <port> on VLAN <vlan>. |
|
Category |
Rapid per VLAN Spanning Tree Protocol |
|
Severity |
Information |
|
Description |
This log event informs the user that the RPVST topology change is generated |
Event ID: 5008 (Severity: Warning)
|
Message |
Port <port> blocked on RPVST <instance> |
|
Category |
Rapid per VLAN Spanning Tree Protocol |
|
Severity |
Warning |
|
Description |
This log event informs the user that the port is blocked on the instance |
Event ID: 5009 (Severity: Warning)
|
Message |
Port <port> unblocked on RPVST <instance> |
|
Category |
Rapid per VLAN Spanning Tree Protocol |
|
Severity |
Warning |
|
Description |
This log event informs the user that the port is unblocked on the instance |
Event ID: 5010
|
Message |
Root port changed from <old_port> to <new_port> on VLAN <vlan>. |
|
Category |
Rapid per VLAN Spanning Tree Protocol |
|
Severity |
Information |
|
Description |
This log event informs the user that the root port is changed |
Event ID: 5011
|
Message |
PVID mismatch detected on <interface> with pvid = <pvid>, Neighbor pvid = <npvid>' throttle_count: 100 |
|
Category |
Rapid per VLAN Spanning Tree Protocol |
|
Severity |
Information |
|
Description |
Log event when the PVID mismatches between the switch and neighbor over an interface |
Event ID: 5012
|
Message |
spanning tree mode changed from <old_mode> to <new_mode>, it will trigger the reconvergence |
|
Category |
Rapid per VLAN Spanning Tree Protocol |
|
Severity |
Information |
|
Description |
This log event informs the user that the spanning tree mode is changed. |
Event ID: 5013
|
Message |
Current Virtual Ports <Current_Virtual_Ports> exceeds the max supported limit <Maximum_Virtual_Ports> |
|
Category |
Rapid per VLAN Spanning Tree Protocol |
|
Severity |
Information |
|
Description |
Log event when the current virtual port count crosses the maximum allowed value |
