AP LEDs

AP LEDs on 802.11n 802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz. and 802.11ac 802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band. APs can be configured in two modes: normal and off. In normal mode, the AP LEDs will light as expected. When the mode is set to off, all of the LEDs on the affected APs are disabled. The AP LED Light Emitting Diode. LED is a semiconductor light source that emits light when an electric current passes through it. mode is configured by enabling the LED Operating Mode parameter in the General section of the AP system profile. For more details, see Configuring the AP System Profile .