Legal Disclaimer: The resource assets in this website may include abbreviated and/or legacy terminology for HPE Aruba Networking products. See www.arubanetworks.com for current and complete HPE Aruba Networking product lines and names.
Applying Authentication Profile Configurations to AirGroup
The AirGroup module accepts RADIUS Remote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources. authentication profile changes such as nas-IP and source-interface through the aaa authentication-server radius CLI Command-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command. Configurations vary depending on the AirGroup mode used.
The following procedures explain how to apply RADIUS Remote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources. server profile configurations to AirGroup version 2 deployments using the CLI Command-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions.. For more information on the aaa authentication-server radius CLI Command-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command, visit The CLI Bank.
Applying Configurations on Centralized Mode
Centralized mode requires configurations to be applied at both the Mobility Conductor and managed device level. In the case of having different authentication profile settings configured, the managed devices’s profile will take priority.
/mm
(MM) *[mm] (config) #aaa authentication-server radius "mm"
(MM) *[mm] (config) (RADIUS Remote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources. Server "mm") #nas-ip 10.10.10.2
/md
(MM) *[md] (config) #aaa authentication-server radius "md0"
(MM) *[md] (config) (RADIUS Remote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources. Server "md0") #nas-ip 10.10.10.4
Applying Configurations on Distributed Mode
Distributed mode requires node-specific configuration.
In the case of having governing managed devices, the configuration will apply to all member nodes. However, node-specific configuration can still be applied to individual member nodes if needed.
/md
(MM) *[md] (config) #aaa authentication-server radius "md-node"
(MM) *[md] (config) (RADIUS Remote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources. Server "md-node") #nas-ip 10.10.10.4
