ucc
facetime {enable|no|priority video <0-63>}
h323 {enable|no|priority voice <0-63>}
ich {channel-utilization-threshold <50-95>|enable|no}
jabber
enable
no
priority {app-sharing <0-63>|video <0-63>|voice <0-63>}
server-ip <server-ip>
noe {enable|no|priority voice <0-63>}
rtpa-config {enable|no|upstream}
sccp {enable|no|priority voice <0-63>}
session-idle-timeout {no|value <35-250>}
sip
enable
midcall-req-timeout
no
priority {video <0-63>|voice <0-63>}
rtcp-inactivity
skype4b
enable
no
priority {app-sharing <0-63>|video <0-63>|voice <0-63>}
sdn {http|https}
tables
vocera {enable|no|priority voice <0-63>}
wificalling
dns-pattern <dns-pattern> service-provider <service-provider>
enable
no
priority voice <0-62>
This command configures the various UCC Application Layer Gateways (ALGs).
Parameter |
Description |
Range |
Default |
---|---|---|---|
facetime |
Configures the Apple® FaceTime ALG. The ALG is enabled by default. The DSCP value for the video session is 34 by default. This parameter has the following sub-parameters: Mobility Master. – Enable the Apple Facetime ALG on theRemove or negate a parameter. – The DSCP value for the video session. |
priority video: 0-63 |
priority video: 34 |
h323 |
Configures the H.323 ALG. The ALG is enabled by default. The DSCP value for the voice session is 46 by default. This parameter has the following sub-parameters: Mobility Master. – Enable the H.323 ALG on theRemove or negate a parameter. – The DSCP value for the voice session. |
priority voice: 0-63 |
priority voice: 46 |
ich |
Configures the intelligent call handling. The setting is enabled by default. The Channel Utilization Threshold is 90 by default. This parameter has the following sub-parameters: –The maximum limit for the channel utilization. Mobility Master. –Enable intelligent call handling on the–Remove or negate a parameter. |
channel-utilization-threshold: 50-95 |
channel-utilization-threshold: 90 |
jabber |
Configures the Cisco® Jabber ALG. The ALG is enabled by default. Enter the Cisco Unified Communication Manager IM & Presence server IP. The DSCP values for the voice, video, and app-sharing sessions are 46, 34, and 34, respectively, by default. This parameter has the following sub-parameters: Mobility Master. –Enable Jabber ALG on the–Remove or negate a parameter. –The DSCP value for voice, video, and app-sharing sessions. –Jabber server IP. |
app-sharing, video, and voice: 0-63 |
app-sharing: 34 video: 34 voice: 46 |
noe |
Configures the Alcatel-Lucent® New Office Environment (NOE) ALG. The ALG is enabled by default. The DSCP value for the voice session is 46 by default. This parameter has the following sub-parameters: Mobility Master. – Enable the NOE ALG on theRemove or negate a parameter. – The DSCP value for the voice session. |
priority voice: 0-63 |
priority voice: 46 |
rtpa-config |
Configures the real-time analysis of VoIP calls including upstream real-time analysis. The setting is enabled by default. This parameter has the following sub-parameters: – Enable Real-Time Analysis of VoIP calls. Remove or negate a parameter. –Enable upstream Real-Time Analysis of VoIP calls. |
— |
— |
sccp |
Configures the Cisco Skinny Client Control Protocol (SCCP) ALG. The ALG is enabled by default. The DSCP value for the voice session is 46 by default. This parameter has the following sub-parameters: Mobility Master. – Enable the SCCP ALG on theRemove or negate a parameter. – The DSCP value for the voice session. |
priority voice: 0-63 |
priority voice: 46 |
session-idle-timeout |
Configures the UCC session idle timeout. On configuring this parameter, if the voice session is idle for the configured period, UCM aborts the session on the managed device due to inactivity. The default value is 35. This parameter has the following sub-parameters: Remove or negate a parameter. – Configure UCC session idle timeout in seconds. |
value: 35-250 |
value: 35 |
sip |
Configures the Session Initiation Protocol (SIP) ALG. The ALG is enabled by default. You can enable the and settings. The DSCP values for the voice and video sessions are 46 and 34, respectively, by default. This parameter has the following sub-parameters:Mobility Master. –Enable SIP ALG on the–Enable SIP Midcall request timeout. –Remove or negate a parameter. –The DSCP value for voice and video sessions. –Enable Real-Time Control Protocol inactivity. |
video and voice: 0-63 |
video: 34 voice: 46 |
skype4b |
Configures the Microsoft® Lync/Skype for Business ALG. The ALG is enabled by default. You can set the Skype for Business SDN listen protocol over HTTP or HTTPS. Based on the SDN listen protocol configuration, Mobility Master accepts either HTTP or HTTPS messages from the Skype for Business SDN manager. The DSCP values for the voice, video, and app-sharing sessions are 46, 34, and 34, respectively, by default. This parameter has the following sub-parameters: Mobility Master. –Enable Skype for Business ALG on the–Remove or negate a parameter. –The DSCP value for voice, video, and app-sharing sessions. –Skype for Business SDN listen protocol. The default Skype for Business SDN API listen port is 32000. |
app-sharing, video, and voice: 0-63 |
app-sharing: 34 video: 34 voice: 46 |
tables |
Displays the UCC client MAC and IP address table. This parameter is executable from the mode. |
— |
— |
vocera |
Configure the Vocera ALG. The ALG is enabled by default. The DSCP value for the voice session is 46 by default. This parameter has the following sub-parameters: Mobility Master. – Enable the Vocera ALG on theRemove or negate a parameter. – The DSCP value for the voice session. |
priority voice: 0-63 |
priority voice: 46 |
wificalling |
Configures the Wi-Fi Calling. Wi-Fi Calling is enabled by default. The DSCP value for the voice session is 46 by default. – Configure the DNS pattern for the carrier. A maximum of 10 DNS patterns can be configured. DNS patterns for known carriers are configured by default. Default built-in patterns are: - 3 HK - wlan.three.com.hk - ATT - epdg.epc.att.net - Rogers - epdg.epc.mnc720.mcc302.pub.3gppnetwork.org - SmarTone - epdg.epc.mnc006.mcc454.pub.3gppnetwork.org - Sprint - primgw.vowifi2.spcsdns.net - T-Mobile - ss.epdg.epc.mnc260.mcc310.pub.3gppnetwork.org - Verizon - wo.vzwwo.com If the ePDG FQDN of the carrier does not match with the default patterns, use this option to configure the DNS pattern for the carrier. Mobility Master learns for Wi-Fi Calling age out automatically, if there was no DNS query or response matching that IP for more than seven days. The DNS IP address that– Add the service provider name for enhanced visibility. Mobility Master. – Enable the Wi-Fi calling ALG on theRemove or negate a parameter. – The DSCP value for the voice session. |
priority voice: 0-62 |
priority voice: 46 |
The UCC ALGs must be configured from the Mobility Master. All the ALGs are enabled by default.
node hierarchy ofThe following commands enables Wi-Fi calling on Mobility Master:
(host) [mm] (config) #ucc wificalling
(host) ^[mm] (WiFiCalling Configuration) #enable
The following command displays the UCC client MAC and IP address table. The
command should be executed from the mode:(host) [mynode] #ucc tables
---------------------------------------------
UCC Client MAC table
--------------------
Client(MAC) Client(IP) Type ALG
----------- ---------- ---- ---
68:17:29:9f:b6:77 10.15.88.234 Client Jabber/xmpp/SIP
---------------------------------------------
UCC Client IP table
-------------------
Client(MAC) Client(IP) Type ALG
----------- ---------- ---- ---
00:0b:86:8f:d6:b7 10.15.16.50 Server SIP
00:0b:86:8f:d6:b7 10.15.16.30 Server Jabber
68:17:29:9f:b6:77 10.15.88.234 Client Jabber/xmpp/SIP
---------------------------------------------
Command |
Description |
This command displays the Call Detailed Records (CDR) statistics for UCC. |
|
This command displays the UCC client status and CDR statistics. |
|
This command displays the carrier’s evolved Packet Data Gateway (ePDG) IP address learned by the managed device. This command is specific for Wi-Fi calling clients. |
|
This command displays the Apple Facetime ALG configuration. |
|
This command displays the H.323 ALG configuration. |
|
This command displays the Intelligent Call Handling configuration. |
|
This command displays the number of CDRs, flows, and voice clients created. This is a debug command. |
|
This command displays the Cisco Jabber ALG configuration. |
|
This command displays the Alcatel-Lucent New Office Environment (NOE) ALG configuration. |
|
This command displays the real-time analysis configuration. |
|
This command displays the real-time analysis report. |
|
This command displays the Cisco Skinny Client Control Protocol (SCCP) ALG configuration. |
|
This command displays the UCC session idle timeout configuration. |
|
This command displays the SIP ALG configuration. |
|
This command displays the Skype4B ALG configuration. |
|
This command displays the UCC call statistics. |
|
This command displays the UCC call message trace buffer for Cisco Jabber, Cisco SCCP, SIP, and Microsoft Skype for Business ALGs. |
|
This command displays the Vocera ALG configuration. |
|
This command displays the Wi-Fi calling configuration. |
Release |
Modification |
ArubaOS 8.0 |
Command introduced. |
Platform |
License |
Command Mode |
All platforms |
PEFNG license |
Config mode on Mobility Master |