WAN

This page is available from when you select a managed device from the Mobility Master Managed Network menu, as well as when you are logged in to the managed device. This dashboard is the default landing page for a managed device with uplinks defined via the Uplink Monitoring and Load Balancing . Starting with ArubaOS 8.1.0.0, the WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. dashboard also appears in the Mobility Master WebUI when a branch office controller is selected in the network hierarchy.

 

For more information on defining a WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. uplink, see Uplink Monitoring and Load Balancing  . For information on enabling and the uplink health check features, see Health Check Services for Managed Devices.

The WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. dashboard provides the WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. summary details for uplink VLANsVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN., and contains the following tables:

Uplinks: This section displays the link status and WAN status for VLANsVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. monitored using the uplink manager utility. For each VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN., the green check mark icon indicates an up status and red down arrow represents a down status for the link and WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance.. The Health Check Services for Managed Devices is disabled by default on managed devices. If it is enabled , the WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. status link will appear with a yellow icon, indicating that this feature is in an error state.

Health: This table displays statistics showing the general health of the uplink. If jitter is not enabled, health score is not measured.

Score: The health score rates the health of the uplink on a scale of 1-5, with score of 1 being lower quality and a score of 5 being the highest quality. These scores are based upon the latency and jitter rates, and packet loss.

Latency & Jitter: Jitter is a variation in the inter-packet delay of received packets. If the jitter measurement option is enabled in the uplink manger, the uplink manger uses UDPUser Datagram Protocol. UDP is a part of the TCP/IP family of protocols used for data transfer. UDP is typically used for streaming media. UDP is a stateless protocol, which means it does not acknowledge that the packets being sent have been received. packets on UDPUser Datagram Protocol. UDP is a part of the TCP/IP family of protocols used for data transfer. UDP is typically used for streaming media. UDP is a stateless protocol, which means it does not acknowledge that the packets being sent have been received. port 4500 to measure jitter on the WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. links, and includes jitter statistics in the uplink quality calculations. Jitter statistics will not be measured if jitter measurement is not enabled in the uplink manager settings. For details on enabling and disabling uplink jitter measurements, see Uplink Monitoring and Load Balancing .

Throughput: Displays the inbound and outbound traffic rates between managed device and VPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. concentrator for the selected uplink.

Aggregate Compression: Displays the aggregate percentage compression on all VLANsVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. with the compression feature enabled.

Figure 1  WAN Monitoring Dashboard