You are here: Home > CLI Commands > CLI Commands

ArubaOS Command-Line Interface

The ArubaOS 8.5.0.0 CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. allows you to configure and manage Mobility Master and managed devices. The CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. is accessible from a local console connected to the serial port on the Mobility Master or through a Telnet or Secure Shell (SSHSecure Shell. SSH is a network protocol that provides secure access to a remote device. ) session from a remote management console or workstation.

Telnet access is disabled by default. Do one of the following to enable Telnet access on the Mobility Master,

Enter the telnet CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command from a serial connection or an SSHSecure Shell. SSH is a network protocol that provides secure access to a remote device. session.

In the WebUI, navigate to the Configuration > System > Admin page.

To manually enable telnet CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. on the managed devices, execute the following commands in the /md path of each managed device in the Mobility Master:

(host) [mynode] (config) #firewall cp

(host) [mynode] (config-submode) #ipv4 permit any proto 6 ports 23 23

(host) [mynode] (config-submode) #!

(host) [mynode] (config-submode) #exit

(host) [mynode] (config) #exit

What's New in ArubaOS 8.5.0.0

This section lists the commands introduced, modified, or deprecated in ArubaOS 8.5.0.0.

Commands in ArubaOS 8.5.0.0

New Commands

The following new commands are introduced in ArubaOS 8.5.0.0:

Command

Description

ap wifi-uplink-profile

This command is introduced to configure a Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink profile.

controller-ble opmode

This command is introduced to configure BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. opmode in controller.

show ap debug ble-action-status

This command is introduced to display action status for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP.

show ap wifi-uplink blacklist

This command is introduced to display a list of Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink APs that have been denied access.

show ap wifi-uplink candidates

This command is introduced to display a list of Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink candidate APs.

show ap wifi-uplink connection-history

This command is introduced to display the connection history of APs with Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink enabled.

show ap wifi-uplink connection-trace

This command is introduced to display the connection trace of APs with Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink enabled.

show ap wifi-uplink current-profile

This command is introduced to display the current profile information of APs with Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink enabled.

show ap wifi-uplink debug

This command is introduced to display the debug information of APs with Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink enabled.

show ap wifi-uplink neighbors

This command is introduced to display the information of neighboring APs with Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink enabled.

show ap wifi-uplink-profile

This command is introduced to display a list of all Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink profiles, or display the configuration parameters in a specific Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink profile.

show ap wifi-uplink provisioned-profiles

This command is introduced to display information of provisioned profiles of APs with Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink enabled.

show ap wifi-uplink stats

This command is introduced to display the statistics of APs with Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink enabled.

show ap wifi-uplink status

This command is introduced to display the status of various parameters of APs with Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink enabled.

Modified Commands

The following commands are modified in ArubaOS 8.5.0.0:

Command

Description

aaa profile

The rfc-3576-server <ipaddr> parameter is updated to also support IPv6 address of the server.

aaa rfc-3576-server

The <ipaddr> sub-parameter is updated to also support IPv6 address of the server.

ap-group

The wifi-uplink-profile and enet0-usb-port-profileparameters are introduced.

ap system-profile

The rap-corp-dns-server and rap-corp-dns-server_ ipv6 <ipv6 address> parameters are introduced.

crypto isakmp

The eap-gtc sub-parameter is introduced under the eap-passthrough parameter.

ids general-profile

The default value of max-monitored-devices parameter is modified to include both 1024 and 4096.

iot transportProfile

The aruba-sensors sub-parameter is introduced under the deviceClassFilter parameter.

interface tunnel

The keepalive icmp <ipaddr> <next-hop> parameter is introduced.

lc-cluster group-profile

The parameters, vrrp-id <starting id> and vrrp-passphrase <vrrp passphrase string> were added.

provision-ap

The link-priority-wifi and wifi-uplink parameters are introduced.

rf arm-profile

The cm-he-min-signal parameter is introduced.

rf am-scan-profile

The dwell-time-dos-channel parameter is introduced.

show ap active

A new flag, 4 is introduced to indicate Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink.

show ap database

A new flag, 4 is introduced to indicate Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink.

show ap-group

The Ethernet usb port configuration parameter is introduced.

show iot transportProfile

The aruba-sensors sub-parameter is introduced under the Device Class Filter parameter.

show lc-cluster

The load balance thresholds are updated and and the Starting VRRP ID and VRRP Passphrase fields are added in the output.

show memory

The wcd sub-parameter is introduced under the ap parameter.

show wlan ssid-profile

The wpa3-aes-gcm-256 sub-parameter under the encryption parameter is introduced.

wlan ssid-profile

The refresh-direction parameter and the wpa3-aes-ccm-256 sub-parameter under the opmode parameter are introduced.

/*]]>*/