You are here: Home > CLI Commands > Just_CLI_Topics > airmatch runnow

airmatch runnow

airmatch runnow

eirp

full

incremental

opmode

quick

Description

Manually initiate AirMatch RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. computations and solution deployment instead of waiting for the next scheduled update period.

Syntax

Parameter

Description

eirp

Initiates only the EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. optimization.

full

Initiate the process to perform a full optimization of all APs.

incremental

Optimize only the new APs that have never been optimized by a previous AirMatch solution.

opmode

Generate an AirMatch solution with an opmode update.

quick

Quickly generate an AirMatch solution. This option may produce an AirMatch solution that is not as optimal as a full or regularly-scheduled optimization.

Usage Guidelines

Use the Mobility Master CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. to manually initiate AirMatch RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. computations and solution deployment instead of waiting for the next scheduled update period. Issue this command to manually initiate AirMatch RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. computations any time there is a significant update in the regulatory-domain profile or AirMatch related fields (such as max-channel-bandwidth, eirp-min, and eirp-max) in 802.11g802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network. radio profile or 802.11a802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps. radio profile.

Example

To initiate a full optimization of all APs, access the Mobility Master CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. in enable mode and issue the following command:

(host)[mynode] #airmatch runnow full

Related Commands

Command

Description

airmatch ap

A radio set with the airmatch ap freeze command uses a static radio configuration until those settings get explicitly canceled with the airmatch ap unfreeze command.

airmatch profile

This command configures the AirMatch profile.

Command History

Release

Modification

ArubaOS 8.3.0.0

The eirp and opmode parameters were introduced.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/