You are here: Home > CLI Commands > Just_CLI_Topics > ap am-filter-profile

ap am-filter-profile

ap am-filter-profile {default | <profile-name>}

allow-ap-group

allow-self

ap-group <ap-group>

ap-name <ap-name>

clone

filter-enable

no

Description

This command configures an AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. filter.

Syntax

Parameter

Description

Default

am-filter-profile <profile-name>

Name of this instance of the profile

default

allow-ap-group

Allows all APs in the same group as the AP

 

allow-self

Allows AP to hear its own frames

 

ap-group <ap-group>

Allows all APs in the group

 

ap-name <ap-name>

Name of AP to allow

 

clone {default | <source>}

Copy data from another AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. filter

 

filter-enable

Enable AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. filtering

 

no

Delete command

 

Example

The following command allows AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. filtering for all APs in the test1 group:

(host) [mynode] (config) #ap am-filter-profile test

(host) [mynode] (AM Filter "test") #ap-group test1

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/