You are here: Home > CLI Commands > Just_CLI_Topics > ap authorization-profile

ap authorization-profile

ap authorization-profile {default | <profile-name>}

ap-authorization-group <profile-name>

clone {default | <source>}

no

Description

This command defines a temporary configuration profile for remote APsRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. that are not yet authorized on the network.

Syntax

Parameter

Description

Range

Default

ap authorization-profile <profile-name>

Name of this instance of the profile.

1–63 characters

default

ap-authorization-group <profile-name>

Name of a configuration profile to be assigned to the group unauthorized remote APsRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link..

clone {default | <source>}

Copy data from another authorization profile.

default

no

Delete command.

Usage Guidelines

The AP authorization-profile specifies which configuration should be assigned to a remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. that has been provisioned but not yet authenticated at the remote site. By default, these yet-unauthorized APs are put into the temporary AP group authorization-group and assigned the predefined profile NoAuthApGroup. This configuration allows a user to connect to an unauthorized remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. through a wired port and then enter a corporate username and password. Once a valid user has authorized the remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link., the AP will be permanently marked as authorized on the network and will then download the configuration assigned to that AP by its permanent AP group.

Example

The following command creates a new authorization profile with a non-default configuration for unauthorized remote APsRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link.:

(host) [mynode] (config) #ap authorization-profile default2

(host) [mynode] ((AP Authorization profile "default2") #authorization-group NoAuthApGroup2

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/