You are here: Home > CLI Commands > Just_CLI_Topics > ap ble-init-action

ap ble-init-action

ap ble-init-action ap-name <ap-name> | ip-addr <ip-addr> | ip6-addr <ipv6 address>

Description

This command will initiate BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. action for APs.

Syntax

Parameter

Description

ap-name <ap-name>

Name of the AP.

ip-addr <ip-addr>

IP address of the AP.

ip6-addr <ipv6 address>

IPv6 address of the AP.

apb-power-reset

This parameter will power-on reset for the on-board BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. radio.

clear-all-beacons

This parameter will delete all beacon data.

clear-all-log-mac-filters

This parameter will clear all the BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. daemon log MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. filters.

clear-log-mac-filter

This parameter will clear the BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. daemon log MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. filter.

log-level

BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. daemon log level specified as a number.

log-level-str

BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. daemon log levels specified as comma-separated

values (without quotes). Possible values:

'info','warning','error','ageout','bmreq','fw-upgrade','

fw-upgradeerr','cfgupdate,'cfgupdateerr','beacon','bcntl

v','bcnerr','apb','tags','zf','amon','iot_gw','at-https-

json','at-websocket-protobuf'.

log-mac-filter

BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. daemon log MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. filter.

msg-select

Set bits to enable specific messages from APB to

controller BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. Daemon - refer to BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. config CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. cmd.

ota-fw-upgrade

Over the Air firmware upgrade for onboard BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption..

remove-beacon-mac

Delete beacon with matching MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

send-apb-update

Send APB info update to BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. Relay on controller.

send-update

Send IoTInternet of Things. IoT refers to the internetworking of devices that are embedded with electronics, software, sensors, and network connectivity features allowing data exchange over the Internet. payload message to BMCBeacon Management Console. BMC manages and monitors beacons from the BLE devices. The BLE devices are used for location tracking and proximity detection. immediately.

start-log

Enable BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. Daemon logging.

stop-log

Disable BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. Daemon logging.

zigbee permit-joining restart

Re-start zigbee initial permit joining duration.

all

Re-start all devices.

mac <mac-address>

Re-start specific devices.

Command History

Release

Modification

ArubaOS 8.4.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/