You are here: Home > CLI Commands > Just_CLI_Topics > ap debug dot11r remove-key

ap debug dot 11r remove-key

ap debug dot 11r remove-key <mac>

[ap-name <ap-name> | ip-addr <ip-addr>| ip6-addr <ip6-addr]

Description

This command removes the r1 key from an AP.

Syntax

Parameter

Description

<mac>

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the client.

ap-name <ap-name>

Name of the AP.

ip-addr <ip-addr>

IP address of the AP.

ip6-addr <ip6-addr>

IPv6 address of the AP.

Usage Guideline

Use this command to remove an r1 key from an AP when the AP does not have a cached r1 key during Fast BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. Transition roaming.

Examples

You can use the following command to remove an r1 key from an AP when the AP does not have a cached r1 key during Fast BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. Transition roaming.

(host) [mynode] #ap debug dot11r remove-key <mac> ap-name <ap-name> | ip-addr <ip-addr>

(host) [mynode] #ap debug dot11r remove-key 00:50:43:21:01:b8 ap-name MAcage-105-GL

Execute the following command to check if the r1 key is removed from the AP:

(host) [mynode] #show ap debug dot11r state ap-name MAcage-105-GL

Stored R1 Keys

--------------

Station MAC Mobility Domain ID Validity Duration R1 Key

----------- ------------------ ----------------- ------

Related Commands

Command

Description

show ap debug dot11r

Use this command to check if the r1 key is removed from an AP.

Command History

Release

Modification

ArubaOS 8.2.0.0

The ip6-addr parameter was introduced.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/