You are here: Home > CLI Commands > Just_CLI_Topics > ap debug openflow

ap debug openflow

ap debug openflow flows

delete-all {ap-name|ip-addr <ip-addr>|ip6-addr}

Description

This command deletes all the OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. flows.

Syntax

Parameter

Description

flows

A list of OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. flows.

delete all

Deletes all OpenFLow flows.

ap-name - name of the AP to be deleted.

ip-addr - IPv4 address of the AP.

ip6-addr - IPv6 address of the AP.

Usage Guidelines

This command should only be used under the guidance of Aruba technical support.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

Available on all platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/