You are here: Home > CLI Commands > Just_CLI_Topics > ap debug radio-event-log

ap debug radio-event-log

ap debug radio-event log [start|stop] [ap-name <name>|ip-addr <ip-addr>|ip6-addr <ip6-addr>] radio <0|1> events [all|ani|hex|rcfind|rcupdate|rx|size|text|tx]>]

Description

Start and stops packet log capture of radio events for debugging purposes, and sends a log file of the events to a dump server when  logging stops.

Syntax

Parameter

Description

start

Start Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. packet log capture.

ap-name <ap-name>

Name of the AP for which you want to capture packet log events.

radio 0|1

Include this parameter to start or stop packet log capture for the specified radio.

events

Classification the event type to capture, can be hex and multiple, default all.

all: Capture all of the following types of radio events

ani : Adaptive Noise Immunity control events

hex: Hex format of event tx=0x1|rx=0x2|rcfind=0x4|rcupdate=0x8|ani=0x10|text=0x20

rcfind: Transmission (Tx) control event

rcupdate: Transmission (Tx) rate update event

rx: Received (Rx) status register event

size: radio log size,range 1024-10485760 bytes(1KB-10MB), Default:3145728 bytes(3MB)

text: Text record event

tx: Transmission (Tx) control and Tx status register event

ip-addr <ip-addr>

IPv4 address of the AP for which you want to capture packet log events.

ip6-addr <ip6-addr>

IPv6 address of the for which you want to capture packet log events.

stop

 

Stop Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. packet log capture and send a log file of the events to a dump server.

Example

The following commands starts and stops a Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. radio event log:

(host) [mynode] #ap debug radio-event-log start ap-name 6c:f3:7f:c6:71:90 radio 0 events all

(host) [mynode] #ap debug radio-event-log stop ap-name 6c:f3:7f:c6:71:90 radio 0

Related Commands

Command

Description

show ap debug dot11r

Use this command to display the Radio log capture status.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/