You are here: Home > CLI Commands > Just_CLI_Topics > ap gap-db

ap gap-db

ap gap-db

[reinit-

resync lms {lms-ip <lms-ip>}|{lms-ip6 <lms-ip6>} [{ap-name <ap-name>|{wired-mac <wired-mac>}]

Description

Resynchronize an AP status on a managed device and Mobility Master.

Syntax

Parameter

Description

reinit-db

Re-initialize GAP DB.

resync

Trigger a re-sync.

lms-ip <lms-ip>

lms-ip6 <lms-ip6>

Synchronize the status of all APs terminating on the specified Managed device. Specify either the IPv4 address or the IPv6 address of the managed device.

ap-name <ap-name>

Synchronize only the AP with the specified AP name.

wired-mac <wired-mac>

Synchronize only the AP with the specified MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

Usage Guidelines

A managed device sends AP status messages about the APs terminating on that managed device to Mobility Master. In the event that an AP state appears to be different between Mobility Master and the managed device, this command will resynchronize the AP status information by allowing the managed device and Mobility Master to exchange a list of APs.

Example

The following command triggers a resynchronization for an IPv4 address of the managed device.

(host)[mynode]#ap gap-db resync lms lms-ip 10.20.10.20

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/